adam1 2 Posted April 26, 2009 Report Share Posted April 26, 2009 Its the silencer thats causing my mates AA S410 to spray pellets, when i took it off it was putting pellets in the same hole time after time at 30 yds when it went back on and same old story 2ft plus out. Whats happend and can it be mended or is the silencer for the scrapheap, by the way i belive its an AA silencer. Thanks for all your help Adam Quote Link to post
Guest buster321c Posted April 26, 2009 Report Share Posted April 26, 2009 Put it back on and make sure its a tight fit/snug on the barrel before you do up the grub screw . It may have been banged or knocked causing it to be outof line , i would also open it up and check the baffles are in line too . Quote Link to post
postiepaul 0 Posted April 26, 2009 Report Share Posted April 26, 2009 check the inside is. absolutely free of dust, cobweb or any tiny bits of crud picked up from shooting. the smallest bit could affect the air around the pellet and send it off course. I always keep a coinbag over the barrel in storage to keep everything out, when not in use. sorry if you knew that but its just one of the things Im particular about and is a reason for a gun going off zero. Quote Link to post
taff3915 2 Posted April 26, 2009 Report Share Posted April 26, 2009 i had the same problem when i had a s400 with a AA silencer the pellets were clipping the very end of the silencer. bought a ukneil one no probs after and totally silenced. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.