a1b1e 0 Posted April 19, 2009 Report Share Posted April 19, 2009 Im shooting with a browning a-bolt 26" barrel 1 in 14 twist at the moment using H380 powder and hornardy v-max 55 gr bullets but i am open to any sugestions thanks Al Quote Link to post
dicehorn 38 Posted April 19, 2009 Report Share Posted April 19, 2009 Im shooting with a browning a-bolt 26" barrel 1 in 14 twistat the moment using H380 powder and hornardy v-max 55 gr bullets but i am open to any sugestions thanks Al Your H380 is a good powder - used it myself until I found N150 for the 55gr V Max I dont know how serious you are at home loading - do you use a comparitor for your bullet ogive measurements, do you neck turn, do you weigh your empty new cases to get roughly the same weight, do you weigh your bullets and batch them to the exact weight?? Choice of primers? Do you know the exact headspace of the cases? All the above help in getting the rifle to shoot better groups. I have two 22.250 - bog standard rifles (Rem700 & Blaser) I know most reloaders will tell you to seat the bullet head somewhere between 30 and 15 thou back from the lands - this is fine for them that use AIs or bench rest custom rifles - both of my rifles have their bullet heads seated 137 thou back from the lands Hopefully (1st attempt at this) a piccy of a 4 shot group I did a couple of months ago - the stray bullet was difinitely me pulling the last shot (Christ I'm well over 60 ) Quote Link to post
v-max 2 Posted April 20, 2009 Report Share Posted April 20, 2009 I use a many powders with great results but am on Varget now & its good. cci prim 36g varget 55g v-max 1/2" at 100m. Iv had great results with H380 BL-C2 N140 but am on the Varget now. Quote Link to post
Mr_Logic 5 Posted April 20, 2009 Report Share Posted April 20, 2009 Not tried them in 22-250 as I don't have one, but RL10X and RL15 worked well in my 204, and good velocities are listed for 22-250 so worth a look. Quote Link to post
woz 260 Posted April 20, 2009 Report Share Posted April 20, 2009 36g varget.....50g vmax....cci br2 primers....... Quote Link to post
Daieye68 1 Posted April 20, 2009 Report Share Posted April 20, 2009 22/250 at 100yds 33.5grs of H335 powder 55grs SP 1st shot slightly left 2nd & 3rd in the bull not the best of photos though Dai Quote Link to post
SUSSEX LAD 0 Posted April 20, 2009 Report Share Posted April 20, 2009 Not quite what you asked for i load 50grn Nosler BT's 37.5 grn of Varget CCI br Primers Win Brass 2.380 OAL in a Browning A-Bolt Eclipse 22-250 and get 1/2 inch groups all day long, every day Quote Link to post
mj robson 8 Posted April 23, 2009 Report Share Posted April 23, 2009 I get 1/2" groups with Sako Gamehead 55gr SP factory loads in my 22-250. Mark. Quote Link to post
rob reynolds uk 3 Posted May 2, 2009 Report Share Posted May 2, 2009 vit 135 31.5 gn 55gn bullet shoots very very well out of a sako 75 .. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.