mcfletty 0 Posted April 17, 2009 Report Share Posted April 17, 2009 is it possible to homeload subsonic rounds for a 22.250?and if you can are they any good. Quote Link to post
Deker 3,478 Posted April 17, 2009 Report Share Posted April 17, 2009 (edited) is it possible to homeload subsonic rounds for a 22.250?and if you can are they any good. If you make Home Brews you can do very nearly whatever you want, but what makes you ask specifically about a 22-250 sub, why not a .223 or .243, etc, etc ...seems a slightly strange question and, the resultant cartridge would only have a very limited use. "Are they any good" ......at doing what??? The primary purpose of a 22-250 is to fly fast and flat and hit hard...that doesn't happen in a sub version! Edited April 17, 2009 by Deker Quote Link to post
njc110381 0 Posted April 17, 2009 Report Share Posted April 17, 2009 Chances are he has a .22-250 and wants to make some subs for it? You can load subsonic in most rounds, but safety can be an issue. You need to load a fast pistol powder in low quantities, but don't just estimate, get some good advice first. Accuracy can be fairly reasonable. Try to use short bullets as they will be stable at lower revolutions than long ones (slower velocity means slower spin from the rifling). Quote Link to post
Mr_Logic 5 Posted April 17, 2009 Report Share Posted April 17, 2009 is it possible to homeload subsonic rounds for a 22.250?and if you can are they any good. In a nutshell: 1. Yes 2. No. Quote Link to post
humperdingle 0 Posted April 17, 2009 Report Share Posted April 17, 2009 I'll keep my .22-250 doing 3,700 fps I think... I LIKE the noise And keep my .22 rimfire for subs. Quote Link to post
3bl 0 Posted April 17, 2009 Report Share Posted April 17, 2009 A few years ago a writer who worked for :Gun Mart:called Bruce Potts ran some tests on sub sonic ammo but I believe it was in .308 cal,the cases he used could only be loaded with a small quantity of powder,the inside of the case was solid brass and were probably specially made. The british army conducted tests with a moderated Accuracy International using sub sonic ammunition a few years previous and I suspect that it would have been in .308 cal,the reports were that it was good out to 300yards. As NJC110381 said you will have to try and get someone who has experience of loading sub sonic ammunition do not try it on your own there is very little margin for error, and it can be dangerous,Bruce Potts may have carried out tests on a 22-250 so try the Gun Mart website,they may be able to put you in touch with him,good luck. Quote Link to post
mcfletty 0 Posted April 18, 2009 Author Report Share Posted April 18, 2009 thanks for the replies ,the reseason i asked was simply if im out stalking and had a blank session i might easily turn to a few rabbits without needing to have the .22 with me as well.and the 22.250 even moderated could scare off every thing around. Quote Link to post
Mr_Logic 5 Posted April 18, 2009 Report Share Posted April 18, 2009 No it won't, just blat them with 22-250 proper ammo. I have a 204, which is definitely quieter than the 22-250, but once moderated not by that much. I was out with Deker the other day, there was a line of bunny rabbits out, I went down the line and knocked over 5 in one string, they weren't really bothered by the noise. Quote Link to post
v-max 2 Posted April 18, 2009 Report Share Posted April 18, 2009 As said its a dangour to sub it down. I just plato with the normal ammo but not to much at one time this is when you will shoot out a barrel. Quote Link to post
jamie g 17 Posted April 18, 2009 Report Share Posted April 18, 2009 pointless imo mate. 22/250 needs to be pushed fast and hard. thats what makes it a 22/250. if you want to use subs shoot a 22lr the rabbits wont be scared of the noise of the 22/250. dont forget its loud at the rifle. but popping rabbits off over a couple 100 yards away they wont no whats hit them Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.