Mr Adventure 0 Posted March 30, 2009 Report Share Posted March 30, 2009 Need some help....... my T3 is having ejection problems it's a 223 . The case is not getting flicked out of the breech. I'm getting a extractor and ejector with the springs sent from GMK. Has anyone striped a T3 bolt? If so is it easy? There looks like only a spring pin that holds the ejector in place, if this is removed will the extractor come out to? This is to save me sending the gun away. Cheers Quote Link to post
jamie g 17 Posted March 31, 2009 Report Share Posted March 31, 2009 hi mate have you looked on the net for any pictures of how to strip it ? if you cant find any have a look on bbs and ask as there are alot of guys on there with tikkas. and im sure if no one on here has done it someone will have done it on there. hope you get it sorted Quote Link to post
arveyboy 0 Posted April 6, 2009 Report Share Posted April 6, 2009 do you reload your own ammo? if so do you carry out a full resize of each case after theyre fired or do you leave them fireformed because if so that could present a few problems with ejecting. just a thought Quote Link to post
jamie g 17 Posted April 6, 2009 Report Share Posted April 6, 2009 (edited) do you reload your own ammo? if so do you carry out a full resize of each case after theyre fired or do you leave them fireformed because if so that could present a few problems with ejecting. just a thought it should be ok just neck sizing them if anything i would say he has a problem with the extractor. how old is the rifle ? if its under warrenty then take it back to the shop Edited April 6, 2009 by jamie g Quote Link to post
Fidgety 8 Posted April 6, 2009 Report Share Posted April 6, 2009 Manual downloads on the Tikka website. Quote Link to post
Mr Adventure 0 Posted April 6, 2009 Author Report Share Posted April 6, 2009 Thanks for the info .... but the rifle has been set back to GMK. The problem was not the extractor it was not ejecting the empty case from the breech, the case would just fall on top of the mag. As the rifle was still under warranty I sent it back. So lets see how long it takes to come back? I use factory and reloads in the gun both were doing the same. Cheers Quote Link to post
Deker 3,478 Posted April 6, 2009 Report Share Posted April 6, 2009 Mine has never extracted well but is now doing my head (.223 T3Lite stainless), at Bisley yesterday and perhaps 1 in 10 came out...sounds just like you..extracting fine but simply not ejecting...can you keep me up to speed with the results...cheers Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.