TOMO 26,029 Posted February 26, 2009 Report Share Posted February 26, 2009 ok chaps , i want to make a shed load of pegs, what im after is oak planks, about 1/2 inch thik and about 6 or 7 inch wide. then i can cut streight across evry inch, then cut that bit across the diaganal . a quik sand and a drill a hole , job done. went to b&q , no good. so where would i find wood of this type Quote Link to post
stephen58 1 Posted February 26, 2009 Report Share Posted February 26, 2009 Hi Tomo, what about old floor~boards from a house that is being re~juvenarated/repaired (make sure there is no wood~worm in the boards ) just an idea !! best regards Steve Quote Link to post
fishfish 17 Posted February 26, 2009 Report Share Posted February 26, 2009 find a local cabinet/furniature maker he will have some /sell you some/ point you in the right direction! Quote Link to post
doddsy1970 9 Posted February 26, 2009 Report Share Posted February 26, 2009 why do you not use hazel ? There is loads of it about, if you cut the sticks now they will be dried out by next season. Quote Link to post
TOMO 26,029 Posted February 26, 2009 Author Report Share Posted February 26, 2009 why do you not use hazel ? There is loads of it about, if you cut the sticks now they will be dried out by next season. yes i allready do dodsy , i like it alot , and go to extream lengths sanding shaping ect , just fancied doing some oak ones, of my own , to my own spec. Quote Link to post
doddsy1970 9 Posted February 26, 2009 Report Share Posted February 26, 2009 why do you not use hazel ? There is loads of it about, if you cut the sticks now they will be dried out by next season. yes i allready do dodsy , i like it alot , and go to extream lengths sanding shaping ect , just fancied doing some oak ones, of my own , to my own spec. No worries Quote Link to post
micky 3,325 Posted February 26, 2009 Report Share Posted February 26, 2009 ok chaps , i want to make a shed load of pegs, what im after is oak planks, about 1/2 inch thik and about 6 or 7 inch wide. then i can cut streight across evry inch, then cut that bit across the diaganal . a quik sand and a drill a hole , job done. went to b&q , no good. so where would i find wood of this type FLOORS R US Quote Link to post
AL BUNDY 45 Posted February 26, 2009 Report Share Posted February 26, 2009 oak pegs ffs do you think it grows on trees Quote Link to post
scotty12 1,888 Posted February 26, 2009 Report Share Posted February 26, 2009 just cut down an oak tree haha Quote Link to post
SamMoss17 0 Posted February 26, 2009 Report Share Posted February 26, 2009 Lol my first 10 pegs where awful..i made they from sticks..sharpend from knifes..knocked a nail thrugh..put the rope/courd through with a nail..and glued them lol was quite funny took me ages..they do work tho , just thought i'd add that lol Quote Link to post
shepp 2,285 Posted February 26, 2009 Report Share Posted February 26, 2009 Can someone put up a photo of a nicely made hazel peg Quote Link to post
Coatesy900 0 Posted February 26, 2009 Report Share Posted February 26, 2009 Mine are just kindling whittled to a point and a hole drilled through. Theres no need for anything fancy IMO Quote Link to post
peterbirdman1 206 Posted February 26, 2009 Report Share Posted February 26, 2009 Hi Tomo go to your nearest undertakers. All coffins are made from oak they are usually glad to get rid of all the off cuts. Thats were i get mine from. Quote Link to post
Tyla 3,179 Posted February 26, 2009 Report Share Posted February 26, 2009 im a carpenter and i use the offcuts from oak skirtings. Your best bet would be to try your nearest sawmill, they will probably give you offcuts for free Quote Link to post
postiepaul 0 Posted February 26, 2009 Report Share Posted February 26, 2009 local reclaimation or salvage business might be worth a visit. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.