CZ511 clean down?

[Jim Taylor 0]

Anyone any tips/clues on how to dismantle the firing mech on a .22lr cz511?

took the stock off but not sure after that!

 

bore snaked the barrel and cleaned as much crud out of the chamber as i could,but the action still feels a bit gritty.

 

bought second hand with no manual.

[humperdingle 0]

Anyone any tips/clues on how to dismantle the firing mech on a .22lr cz511?

took the stock off but not sure after that!

 

bore snaked the barrel and cleaned as much crud out of the chamber as i could,but the action still feels a bit gritty.

 

bought second hand with no manual.

 

You can download a PDF from here:

 

http://www.czub.cz/navody/cz511_en.pdf

 

The trigger unit is released via a push-in clip. That just comes out and the action can be dismantled for cleaning. A bit of a tip is to take the magazine apart aswell and give it a good clean out. Mine were full of crud, and were not cycling subsonics properly.

Edited February 13, 2009 by humperdingle

[Jim Taylor 0]

Anyone any tips/clues on how to dismantle the firing mech on a .22lr cz511?

took the stock off but not sure after that!

 

bore snaked the barrel and cleaned as much crud out of the chamber as i could,but the action still feels a bit gritty.

 

bought second hand with no manual.

 

You can download a PDF from here:

 

http://www.czub.cz/navody/cz511_en.pdf

 

The trigger unit is released via a push-in clip. That just comes out and the action can be dismantled for cleaning. A bit of a tip is to take the magazine apart aswell and give it a good clean out. Mine were full of crud, and were not cycling subsonics properly.

Nice one mate.