sauer 2 Posted February 4, 2009 Report Share Posted February 4, 2009 hiya guys had my webley & scott 810 3" semi-auto for couple o years now...and its great cheap yes but does what it says on the tin id now like to attatch a sling to it.... the screw end on the fore stock has a small hole which i guess i can but a fitting for to attatch a sling at the fore end but nowt on the stock underside...no hole anything.... i did ask webley when i bought gun but they didnt have fittings for it at that time any of you guys know of where i can buy sling fittings to attatch to a synthetic stock etc cheers sauer Quote Link to post
gluebeam 0 Posted February 4, 2009 Report Share Posted February 4, 2009 hi there i just fitted these http://cgi.ebay.co.uk/SHOOTERS-RIDGE-SLING...oQQcmdZViewItem to my dads wanlnut stocked 810. the machine screw one needs to be cut down a bit but they work good. if attaching the rear stud to a synthetic stock you would probably have to drill then tap the hole and then use arildite or somethin to keep it nice and tight. hope this helps Quote Link to post
sauer 2 Posted February 5, 2009 Author Report Share Posted February 5, 2009 cheers bud that would work for the stock but ,,,, need something different for fore end....similar end with hole but without the huge thread....there is a hole already in the knurled "nut so would need some thing with a "backing plate" on underside of the knurled "nut"or cap of the fore end cheers sauer Quote Link to post
Country Life 0 Posted February 5, 2009 Report Share Posted February 5, 2009 hiya guys had my webley & scott 810 3" semi-auto for couple o years now...and its great cheap yes but does what it says on the tin id now like to attatch a sling to it.... the screw end on the fore stock has a small hole which i guess i can but a fitting for to attatch a sling at the fore end but nowt on the stock underside...no hole anything.... i did ask webley when i bought gun but they didnt have fittings for it at that time any of you guys know of where i can buy sling fittings to attatch to a synthetic stock etc cheers sauer It would be an idea to check out your local gun smith. I have seen shotgun slings specialy made and look rather tempting and by all accounts no fixings are required. This may be of help.. http://www.cheshiregunroom.com/store/sling...253_55_297.html John Quote Link to post
gluebeam 0 Posted February 6, 2009 Report Share Posted February 6, 2009 the magazine end cap hole fits that machine screw one good and there is a recessed hole in the magazine tube which can accomodate the nut of the screw. all you have to do is cut the thread down a bit with a hacksaw. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.