Bobo 135 Posted January 27, 2009 Report Share Posted January 27, 2009 Anyone any good at fixing the innards of lightforce handles or have any tips on sorting them,i have two variable blitz's here with wiring probs. Quote Link to post Share on other sites
paddy.t 5 Posted January 27, 2009 Report Share Posted January 27, 2009 Anyone any good at fixing the innards of lightforce handles or have any tips on sorting them,i have two variable blitz's here with wiring probs. Good with wiring, but never done a lamp. can you stick a few pics up for us to have a gander ? What happens when you switch them on regarding the wiring problems? Quote Link to post Share on other sites
happylamper 7 Posted January 27, 2009 Report Share Posted January 27, 2009 i had problems with the wires on mine proper carry on to fix them but can be done the bulb holder is very tricky they r 3 metal clips [bANNED TEXT] holds it in also take the swicth apart. nightmare. good luck Quote Link to post Share on other sites
amroth29 0 Posted January 27, 2009 Report Share Posted January 27, 2009 i have had trouble with the striker , i sent an email to lightforce and they sent me a new cable with a different plug attached , and instuctions how to get into the handle , i had a variable control which meant i had to drill the rivet holding the bulb holder and pull the cable through that way . Quote Link to post Share on other sites
happylamper 7 Posted January 27, 2009 Report Share Posted January 27, 2009 thatv was'nt bad then amroth29,maybe thats what i should of done. Quote Link to post Share on other sites
amroth29 0 Posted January 28, 2009 Report Share Posted January 28, 2009 thatv was'nt bad then amroth29,maybe thats what i should of done. send them an email they told me they had a lot of complaints , the plug they sent me is a lot better , its rubber and not so cheap looking as the ones they sell with the lamp , time will tell how rugged it is . Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.