Magpie_Hunter 17 Posted January 20, 2009 Report Share Posted January 20, 2009 Wich Sound moderator,suppressor is the best for a .308? if you look at. -Accuracy -Sound (Decibel) -quality -... i've a Remington 700 SPS i need some info before i buy one, i would rather pay some more cash for a good one than for a Mod thats is shit.. Thanks Magpie_Hunter Quote Link to post
SNAP SHOT 194 Posted January 20, 2009 Report Share Posted January 20, 2009 A-tec mod. i've just ordered one a few days ago. check them out here.... for a write up...... http://www.customprecisionrifles.com/index.html Quote Link to post
Magpie_Hunter 17 Posted January 20, 2009 Author Report Share Posted January 20, 2009 thanks! Snap shot Quote Link to post
Magpie_Hunter 17 Posted January 20, 2009 Author Report Share Posted January 20, 2009 any other good Mods? Quote Link to post
clivej 0 Posted January 20, 2009 Report Share Posted January 20, 2009 There's been a lot of talk about moderators lately. Anyway I think I'm going to settle on an ASE Utra NorthStar. Made from stainless steel and goes back along the barrel. BUT as I now have a .223 and thinking about getting a 6.5x5.5 or 308 down the line I will be getting the mod in a .30 size to fit both. Hopefully not to much extra noise when used on the .223. Quote Link to post
jamie g 17 Posted January 20, 2009 Report Share Posted January 20, 2009 ase mod for sure Quote Link to post
Deker 3,478 Posted January 21, 2009 Report Share Posted January 21, 2009 clivej said: There's been a lot of talk about moderators lately.Anyway I think I'm going to settle on an ASE Utra NorthStar. Made from stainless steel and goes back along the barrel. BUT as I now have a .223 and thinking about getting a 6.5x5.5 or 308 down the line I will be getting the mod in a .30 size to fit both. Hopefully not to much extra noise when used on the .223. What's the story on these mods, can't find anything on them at all!! Quote Link to post
Sako.243 1 Posted January 21, 2009 Report Share Posted January 21, 2009 Had a T8 and PES mate, Defo rate the PES over the T8. Quote Link to post
clivej 0 Posted January 21, 2009 Report Share Posted January 21, 2009 (edited) Well here the info and data sheets for the ASE Ulta NorthStar mod that was sent to me from Jackson Rilfes. NS_data_sheet.pdfFetching info... NS_3_manual.pdfFetching info... Edited January 21, 2009 by clivej Quote Link to post
Deker 3,478 Posted January 21, 2009 Report Share Posted January 21, 2009 clivej said: Well here the info and data sheets for the ASE Ulta NorthStar mod that was sent to me from Jackson Rilfes. NS_data_sheet.pdfFetching info... NS_3_manual.pdfFetching info... S5 with a tail by the looks of things! Cheers Quote Link to post
provarmint 25 Posted January 21, 2009 Report Share Posted January 21, 2009 clivej said: Well here the info and data sheets for the ASE Ulta NorthStar mod that was sent to me from Jackson Rilfes. NS_data_sheet.pdfFetching info... NS_3_manual.pdfFetching info... Is it just your preference for an over-barrel mod ? I'm getting a S5 fitted shortly, lighter,slimmer, only 12mm over north star in added length and virtually same moderation. Just curious. ATB PV. Quote Link to post
clivej 0 Posted January 21, 2009 Report Share Posted January 21, 2009 (edited) Deker said: S5 with a tail by the looks of things! Cheers That's what it says in the data sheet. And yes it is just my preference for an over-barrel mod. It should take a little bit more out of the noise and muzzel flip. I have heard the ASE ,not sure what type, on a 6.5x5.5 and it is realy quite. I'm thinking off get a couple of inches taken off the end while I'm getting the barrel threaded and target crowned. 23 1/2" barrel length on my CZ 223 varmint. Edited January 21, 2009 by clivej Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.