DEKAW 85 Posted January 12, 2009 Report Share Posted January 12, 2009 Im looking to replace the connector blocks on my lamp as the original ones are very slack and keeps loosing the power supply. This is what i mean Was thinking of getting some sort of lamp connector blocks off an old car from the scrap yard, would these be ok. If not what should i be looking at doing. Pics of modified lamp connections would be a great help Quote Link to post
iamduvern 62 Posted January 12, 2009 Report Share Posted January 12, 2009 Get down to your local Maplins or RS Spares they have a good selection of cable plugs push fit or screw fit Quote Link to post
The one 8,470 Posted January 12, 2009 Report Share Posted January 12, 2009 Just go on to www.Clulite mate think its about £7 Quote Link to post
magus69 0 Posted January 13, 2009 Report Share Posted January 13, 2009 I had the same prob.I replaced mine with a car cigarette lighter socket and plug, couple of quid from the local motorists discount centre,it means that you can lamp from your vehicle as well. Mike... Quote Link to post
maty j 6 Posted January 14, 2009 Report Share Posted January 14, 2009 The cigarette type and especially the jack plug are aload of wank. Get some of these orange ones with bolt on terminals and they won't come undone again in a hurry. Quote Link to post
DEKAW 85 Posted January 15, 2009 Author Report Share Posted January 15, 2009 Maty thats looks the bisiness. Where did you get the connectors from? Cheers DEKA Quote Link to post
maty j 6 Posted January 18, 2009 Report Share Posted January 18, 2009 I got them free but maplin sell them and I think B&Q do aswell.. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.