V MACH MAINSPRINGS

[adeyhawk1970 0]

Anybody ever fitted a v mach mainspring to their rifle.I dont rate ox mainsprings and wasnt keen on the titan xs so i thought i might try a v mach?

[Bryan 1,362]

Anybody ever fitted a v mach mainspring to their rifle.I dont rate ox mainsprings and wasnt keen on the titan xs so i thought i might try a v mach?

 

yeah i've fited them, they usually have a lot less preload so are easy to fit and run smoothly

Bryan

[targa 5]

Put in a V mach kit is IMO the best thing you can do for your springer gun, also use that V mach seal if you make the descision do tune your gun. Makes your airgun much smoother and easyer to shoot with

You can find all of it here, I think they send overseas.

http://www.target-master.nl/index.php?cPat...hegtu355pms1d65

[T78 4]

don't buy the spring and seal seperate though,for the money you might as well buy the kit. its worth it.see my post on this page. i'm a bit pleased with mine!

[adeyhawk1970 0]

Anybody ever fitted a v mach mainspring to their rifle.I dont rate ox mainsprings and wasnt keen on the titan xs so i thought i might try a v mach?

 

yeah i've fited them, they usually have a lot less preload so are easy to fit and run smoothly

Bryan

exactly what im looking for mate,i found the recoil using ox and titans just wasnt worth it.The rifle(diana 52)is running smooth at the moment just a bit down on power(10.2 ft lbs)but to be honest the mainspring is as weak as hell

[klarakoi 0]

Anybody ever fitted a v mach mainspring to their rifle.I dont rate ox mainsprings and wasnt keen on the titan xs so i thought i might try a v mach?

 

yeah i've fited them, they usually have a lot less preload so are easy to fit and run smoothly

Bryan

exactly what im looking for mate,i found the recoil using ox and titans just wasnt worth it.The rifle(diana 52)is running smooth at the moment just a bit down on power(10.2 ft lbs)but to be honest the mainspring is as weak as hell

 

Hello mate,

V-MACH, do two versions for your rifle UK legal and FAC, Ive used them both and the kits are the dogs wobbly bits, if you know how to tune your rifle without all the kit then you can get a stand alone spring from maccari in the USA for your Diana, again used loads of his springs and there good, the standard crap in the UK like OX and titans are pants,, you have a good rifle there bud treat it to a decent spring, hope this helps,

 

Rob.

[spike 0]

Being a bit cack-handed I sent my rifle off to Mr P to do the work. I have to say it is well worth the money if you are in any way unsure about doing the work. When you take away the postage & cost of kit at (for example) BAR, the man's time is a bargain (won't post on here ). Well worth it.