Jump to content

any ideas


Recommended Posts

hello chaps,I hope someone can help shed some light on a problem iam having with my ruger10/22 carbine.Ive owned the gun for 6yrs,bought it used from local gunshop and shot elys through it from the day i bought it.Over the last couple off weeks ive noticed ive missing shots that i shouldnt really be missing,so ive stripped gun down,gave it really good clean and gone out to set up.[should be as simple as that].Now i cant get no grouping at all,NOTHING!!!.Ive swopped the scope of my .223 and tryed that,NOTHING.Swopped the silencer,NOTHING.Even tryed different ammo,NOTHING.As a last resort ive even tryed to see if i can get some kind of grouping without silencer on,NOTHING. :wallbash: SORRY TO RANT ON BUT ITS DOING MY HEAD IN.Could the rifling be knackered or am i missing something else to try?.Any advice would greatly appreciated.

Link to post

i have 2 ruger 10/22T & there bang-on...

 

the only problem i had with one of them was the accuracy which turned out to be the barrel, i bought one of them 2nd hand of a bloke that chopped the barrel down to 14" & screw cut...

 

i was getting 2" groups bench resting at 25yards " no wonder he sold it " :wankerzo4: ! ... anyway, as soon as i got it screw cut & re-crowned it was shot through the same hole each time whilst bench resting..

 

is yours a T model or the basic model ?

 

also have you tested the rifle to see if any thing is loose ? barrel, stock , moderator ???

Link to post
i have 2 ruger 10/22T & there bang-on...

 

the only problem i had with one of them was the accuracy which turned out to be the barrel, i bought one of them 2nd hand of a bloke that chopped the barrel down to 14" & screw cut...

 

i was getting 2" groups bench resting at 25yards " no wonder he sold it " :wankerzo4: ! ... anyway, as soon as i got it screw cut & re-crowned it was shot through the same hole each time whilst bench resting..

 

is yours a T model or the basic model ?

 

also have you tested the rifle to see if any thing is loose ? barrel, stock , moderator ???

Its the basic model mate and ive checked and double checked for anything coming loose.

Link to post

dont take this the wrong way, but have you let someone else try shooting it ?

 

also what conditions did you test it in ? free hand, bench rest ?

 

failing that, i aint got a clue then !

 

 

one thing, ive never rated those basic rugers, best going for a heavy barrel..

Link to post

To much solvent down the barrel could ruin it, or it could be the possability of a round stuck in the barrel not noticed and cleard with another round, this will in fact damage the barrel and give you the problem you are now facing. when cleaning the barrel did you notice that the pressure aplied was eaven as you pushed the cleaning rod through? a bore snake will not give you any tell tail signs of ware, if you felt that it was a jerky movement as you pushed the rod through I would say that the barrel is damaged. maybe a new barrel.

 

Given the cost, I would sugest a new rifle, but tke it to your Gun Dealer and have him check it out, he may charge you though but its better for peace of mind to have it done by a profesional..

 

Good Luck..

 

John

Link to post
Barrel touching the stock along its length. That will throw bullets all over.

The bog standard 10/22 is not a free floating barrel (neither is the 10/22T actually) by design, so I doubt it's that.

 

Many rimfires aren't - my CZ 452 isn't and that's bloody accurate!

Link to post
To much solvent down the barrel could ruin it, or it could be the possability of a round stuck in the barrel not noticed and cleard with another round, this will in fact damage the barrel and give you the problem you are now facing. when cleaning the barrel did you notice that the pressure aplied was eaven as you pushed the cleaning rod through? a bore snake will not give you any tell tail signs of ware, if you felt that it was a jerky movement as you pushed the rod through I would say that the barrel is damaged. maybe a new barrel.

 

Given the cost, I would sugest a new rifle, but tke it to your Gun Dealer and have him check it out, he may charge you though but its better for peace of mind to have it done by a profesional..

 

Good Luck..

 

John

Now you say that the rod didnt go through very smoothly,just put it down to being ready for a good clean.Going to take it to gunsmiths today so hopefully i should know.Thanks to everyone who replyed :thumbs:

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...