reflex t8 sound mod

[chrissy32 13]

hi there i bought a reflex t8 sound mod for my 222.250 any way cut a long story short this was bought two years ago any way i got my rifle out of the gun cabinet the other day only to notice two little pin hole,s in the sound mod it seems to be rusting from the in side out over has any one else ever had these problems cheers chris

Edited September 9, 2008 by terrierman 1977

[jamie g 17]

hi there i bought a reflex t8 sound mod for my 222.250 any way cut a long story short this was bought two years ago any way i got my rifle out of the gun cabinet the other day only to notice two little pin hole,s in the sound mod it seems to be rusting from the in side out over has any one else ever had these problems cheers chris

 

hi if you send it back to jakson rifles they will sort it for you. i dont no if there is a cost or not

[chrissy32 13]

i try,d the local gun shop where i bought it they said the usual 12 months warranty that load of old sh*t cheers i,ll have to look in to that

[jamie g 17]

i try,d the local gun shop where i bought it they said the usual 12 months warranty that load of old sh*t cheers i,ll have to look in to that

 

jason rifles are the main importer for these mods mate give them a bell see what they say. they are very helpful on the phone

[Sako.243 1]

Heard the Forestry Commision boys were having problems with them as they cant be stripped down and cleaned, They were blowing the end off them with excess use.

[SNAP SHOT 194]

the main reason i think the pinholes are forming from the inside out is that when firing the rounds thruogh the mod creates heat this then condenses on the inside of the mod as it cools forming droplets of moisture therefore causing it to rust when left.......

personally i would prefer the strippable mods over the fixed versions, and i had a t8 also....... needless to say it's fooked now

[shortshot 0]

Jackson rifles will supply a replacement at 60% new cost ie £125. I've just replaced a 5 year old one but a 2 year old one, I'd be more hesitant over. 6 months from when I saw rust blister to when I finally traded it back. First time last week I thought it sounded a bit louder and you could blow through hole (about 3 inches back from front end)

Spoke to Jacksons and their service was brilliant, had a new one direct within 48 hours.

[snapper5 0]

I take mine off when I get back, squirt some Napier cleaner in the end and stand it in a little plastic box to catch any drips. Has stopped it rusting (so far!)

 

S

[chrissy32 13]

well cheers fella,s if any one has a phone number of any of these shops could some one put one on cheers chris