Grim Reaper 1 Posted September 9, 2008 Report Share Posted September 9, 2008 sorry grim! must have been reading with my eyes closed! lol! No worries chap! All the best, Grim. Quote Link to post
Grim Reaper 1 Posted September 9, 2008 Report Share Posted September 9, 2008 (edited) heres one for every one ...???????????i work in the car industry im a mechanic for ford . now we have a spray shop if i went near with silicon spray they flip big time it gets air bourne sticks to cars then paint dont stick .... now if it does that in a garage sure it is air bourne round gun ? ie if you pump your gun up silicone could get in bottle ... i dont no just asking lol I can fully appreciate that Celtic, and that was why i suggested spraying the silicone onto a cloth (thereby making your own silicone cloth, like) and then rubbing the cloth over the blueing. That way, the spray vapour don't get near the bottles or working parts, sort of thing? Regards, Grim. Edited September 9, 2008 by Grim Reaper Quote Link to post
droid 11 Posted September 10, 2008 Report Share Posted September 10, 2008 Is 'silicon' the same as 'silicone'? I've always thought 'silicon' was a non-metallic crystalline element, and 'silicone' something I use to make/repair fish tanks or seal the bath.... Quote Link to post
Guest hyperion Posted September 10, 2008 Report Share Posted September 10, 2008 sorry i forgot the E! lol! Quote Link to post
Grim Reaper 1 Posted September 10, 2008 Report Share Posted September 10, 2008 Is 'silicon' the same as 'silicone'? I've always thought 'silicon' was a non-metallic crystalline element, and 'silicone' something I use to make/repair fish tanks or seal the bath.... I think that both words are used in reference to the same thing you describe the highlighted bit above Droid, its just that Silicon is an Americanism, in respect of the way it is spelt? Much the same as we say 'Colour' - whereas 'Color' is an americanism, if you see what i mean. The sealant you talk of usually says on the tube "silicone kitchen/bathroom sealant" - this refers to the fact that the sealant 'goo' (for want of a better word ) contains silicone within it, as one of its constituent ingredients. I believe this is the correct way of thinking, but someone who knows more can feel free to correct me if i'm wrong. Regards, Grim. Quote Link to post
s horsfield 7 Posted September 10, 2008 Author Report Share Posted September 10, 2008 hi you lot, thanks for all your help i think my best bet is to nip to Euro guns near Doncaster as its my first pre charge and don't want to f--k it up. thanks again lads Quote Link to post
jamie g 17 Posted September 10, 2008 Report Share Posted September 10, 2008 wd40 will be fine but i only use it on my rifles till the morning as its abit to thin oil to protect if the rifle is stored for abit of time. 3in1 oil is much better its alot thicker and so will protect more. THE KEY TO IT MATE IS NOT ! TO DO THIS AS YOU GET HOME RIGHT AWAY AS YOU TRAP THE DAM LEAVE THE RIFLE AT ROOM TEMP 1ST FOR ABIT. IF ITS REALLY WET THEN DRY IT OFF BUT LEAVE IT AT ROOM TEMP THEN OIL ON A RAG AND WIPE OVER. Quote Link to post
s horsfield 7 Posted September 13, 2008 Author Report Share Posted September 13, 2008 cheers thanks for that. Still learning. Quote Link to post
Deker 3,478 Posted September 13, 2008 Report Share Posted September 13, 2008 There are plenty of oils out there, any common gun oil will help with the damp and Legia is great! Quote Link to post
00taz11 39 Posted September 13, 2008 Report Share Posted September 13, 2008 3 in 1 oil it works great Quote Link to post
ChrisJones 7,975 Posted September 14, 2008 Report Share Posted September 14, 2008 sorry lads i know this might sound abit basic , but was out last night and it was abit damp. cleaned the gun down when i got home ,but the next day i found small spots of rust showing on the barrel.Is there any sort of oil i can use to prevent this next time. Did you manage to get the rust off? Quote Link to post
s horsfield 7 Posted September 14, 2008 Author Report Share Posted September 14, 2008 not yet ,been lookin in airgun world to see whats on the market.birchwood casey, blue rust remover anyone heard of it and is it any good Quote Link to post
ChrisJones 7,975 Posted September 15, 2008 Report Share Posted September 15, 2008 I'm a fan of the Birchwood Casey stuff but it can be expensive, so shop around. As for the rust removal... I use Parker Hale Youngs 303 Oil (roughly £3 a can) and some very fine grade steel wool 000 (that's treble zero) or 0000 (quadruple or 4 zero's). Liberally apply the Youngs to the steel wool and the GENTLY work it into the rusty spots. You should feel the steel agitate the rust and it will start to lift off. Do Not Apply Too Much Pressure As You Will Eventually Start To Remove The Blueing. The Coarser The Wool The Quicker This Will Happen When you're done, wipe off the excess although this will act as a rust inhibitor for the future. The sooner you do this the better as corrosion doesn't get any better with time. Quote Link to post
s horsfield 7 Posted September 15, 2008 Author Report Share Posted September 15, 2008 nice one mate, I'll have a look at the Midland game fair and see if i can pick some up, cheers Quote Link to post
Deker 3,478 Posted September 15, 2008 Report Share Posted September 15, 2008 nice one mate, I'll have a look at the Midland game fair and see if i can pick some up, cheers Pay particular attention to everything Chris has mentioned above and highlighted...don't cut ANY of the corners or you will regret it!! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.