cz trigger

[stumpy 0]

hello all

not had my cz to long read reports on the pull on the trigger being heavy. also about i think it was the brooks brothers conversion for it.

well i phoned rimfire magic (south yorkshire supplies) cant get brooks brothers but they do there own £10 plus £!.50 postage bargin i thought

i phoned late saturday afternoon and the kit arrived tuesday morning first post what supurb service

now i will see how i get on fitting it

stumpy

[SportingShooter 0]

Good Going.

 

Let Us know how it goes.

 

Regards

SS

[richie 1]

hope this helps....

 

http://www.thehuntinglife.com/forums/index...c=52658&hl=

[stumpy 0]

thanks lads

it was quite easy under 1/2 hour but the differance is unreal £ 11.50 well spent

[richie 1]

thanks lads

it was quite easy under 1/2 hour but the differance is unreal £ 11.50 well spent

 

 

one piece of advice, & i say this from experience ... take a rubber mallet & hit the bottom of the stock whilst the rifle is cocked as these kits can make the rifles unsafe...

 

lucky for me & who else would of been effected i found this out when i was down the range, when i put the bolt forward the rifle fired due to the trigger been too sensitive...

[Fidgety 8]

Good advice, take it! Was going to fit one to mine, but will try out the mallet thing.

[stumpy 0]

hello lads

it is very true you have to be carefull with these kits

the instructions they send are very good it comes with three diffrent springs 2lb pull ,1.75 pull and one slightly less

i used the 2 lb pull also they send two brass sleves to take up the play in the trigger movement. when you have fitted the bits they tell you to put safety catch on pull the trigger 6 times then release safety to make sure it doesent go off also to bang the but of the gun

if ypu do fit one of these please be careful regards stumpy

in the last year i have gone from 2 shotguns to a s410 air arms to a 22 rimfire now a .17hmr does life get any better

[Ratman2 2]

I actually like the standard CZ trigger.

Rob

[TOM TERRIER 173]

hello all

not had my cz to long read reports on the pull on the trigger being heavy. also about i think it was the brooks brothers conversion for it.

well i phoned rimfire magic (south yorkshire supplies) cant get brooks brothers but they do there own £10 plus £!.50 postage bargin i thought

i phoned late saturday afternoon and the kit arrived tuesday morning first post what supurb service

now i will see how i get on fitting it

stumpy

 

Hi, Interested in getting one for my HMR, have you got the shops number?

Cheers

[young1982 1]

Go to their website the number should be on there.

www.rimfiremagic.co.uk

[Bentham Hitman 0]

mate have fun with the little ball bearing that is an arse to get back in the trigger set! lol it s a deffo two man job.

my cz 452 silohuette has a conversion kit and i got it pulling at 1 1/2lb just righ for me.

 

Anyway good luck!

[TOM TERRIER 173]

Ordered mine!

[young1982 1]

I have two coming in the post, should be here some time next week lets hope their as good as they say.