scope cant problem

[dwighet 1]

Hi there. I have a problem removing the cant out of my nightforce scope by eye..Can anybody tell me the tool to purchase that gets everything squared up. And were can i get one...

Many thanks

Dwighet

[joe w 1]

Hi there. I have a problem removing the cant out of my nightforce scope by eye..Can anybody tell me the tool to purchase that gets everything squared up. And were can i get one...

Many thanks

Dwighet

dwighet-cactus tactical u.s.a sell acd to sort out your scope cant there like scope rings very easy to use.

[dwighet 1]

Hi there. I have a problem removing the cant out of my nightforce scope by eye..Can anybody tell me the tool to purchase that gets everything squared up. And were can i get one...

Many thanks

Dwighet

dwighet-cactus tactical u.s.a sell acd to sort out your scope cant there like scope rings very easy to use.

Thanks Joe but thats not what im really after..What i need is a devise that levels my scope with the barrel during scope istallation..If that make sence..

 

Rgds

Dwighet

[FJager 0]

Can be a frustrating exercise at times, perhaps set up some cushions and place the forend of the rifle on them making sure it is fully supported in a plumb position, then get behind the weapon and try to get your vertical crosshair plumb with a true vertical target line that you have setup in front of the weapon, you can also do a primitive bore sight at the same time. Remember though, that when you shoulder the rifle that you need to make sure you are not canting it in the shoulder.

[Mr_Logic 5]

I use a spirit level on the scope turrets.

 

Get the rifle levelled off before putting the mounts on, then add mounts and scope making sure rifle doesn't move. Before mounting scope make a mental note of precisely where the bubble of the level is, and then make sure it's in the same place when using the top scope turret.

 

Seems to be working, in that shot placement falls vertically down the crosshair.

[spudlington 3]

Think Sportsman sell a spirit level scope ring device. Just use it when attaching your scope fo first time.

[charadam 0]

Good article with information on scope alignment here:

 

http://www.gunsandhunting.com/Midway_august.html

 

And the tool itself, available from Midway UK:

 

http://www.midwayuk.com/apps/eproductpage....leItemID=529349

 

I have no connection with Midway other than as a satisfied customer.

[grayswood 0]

Careful how you spell cant - you might end up with more than you bargained for!

[tonyg6x47 0]

Hi there. I have a problem removing the cant out of my nightforce scope by eye..Can anybody tell me the tool to purchase that gets everything squared up. And were can i get one...

Many thanks

Dwighet

 

 

 

Hi there dwighet the implement I think you are looking for is called "vertical reticle" and you can find it here http://www.neconos.com/details4.htm

I dont know if it is in this country yet. Hope this helps.