pimp my gun!

[fishfish 17]

heres my BSA lightening pimped in realtree!

 

[ferret 1 0]

very nice

[SteveieP 0]

Feck!

Ow do you find it after you've put it down?

[fishfish 17]

dunno i took this pic and it was the last i saw of it!

[MR TEA POT 1,287]

Did you use the tape mate,i did my AAS410 in the fecking stuff,when it got wet it nearly slipped out my hand so i took it off.

On the packet the tape came in it said easy to remove without marking the gun........all i can say to that is BULLSH1T.............i had to keep rubbing mine with a oily rag to get the stuff off .

NEVER will i do it again

[Holdaway 2]

Did you use the tape mate,i did my AAS410 in the fecking stuff,when it got wet it nearly slipped out my hand so i took it off.

On the packet the tape came in it said easy to remove without marking the gun........all i can say to that is BULLSH1T.............i had to keep rubbing mine with a oily rag to get the stuff off .

NEVER will i do it again

 

 

I think this ones been dipped mate.

 

Is that right teapot?

 

H

[fishfish 17]

used the tape but had no problems yet,did my crossbow and bow with it too!

[Holdaway 2]

used the tape but had no problems yet,did my crossbow and bow with it too!

 

 

Well you did a fantastic job. I honestly thought it was dipped!

 

 

H

[Coney 3]

Nice job Fish, the only trouble with doing a good job like that is people will start turning up with rolls of the stuff and asking you "can you set me away & show me what to do first" Ha Ha.

[fishfish 17]

used the tape but had no problems yet,did my crossbow and bow with it too!

 

 

Well you did a fantastic job. I honestly thought it was dipped!

 

 

H

 

it took a couple af hours and a sharp scalpal!!!!!!!

[Jack NUFC 1]

used the tape but had no problems yet,did my crossbow and bow with it too!

 

 

Well you did a fantastic job. I honestly thought it was dipped!

 

 

H

 

it took a couple af hours and a sharp scalpal!!!!!!!

well it looks well worth it

[MR TEA POT 1,287]

used the tape but had no problems yet,did my crossbow and bow with it too!

 

I had no probs with it when i had put it on,it looked great,just like yours does.

Its only when i came to take it off the probs started,it is a barstool to get of,does not affect the bluing on the barrel but does leave a sticky residue.Which takes hours of rubbing with a oily rag to get it off .

If you look through the arigun section you will find my post i did.

[Gaz_1989 9,539]

Ive just come across this thread. I have been thinking about doing my daystate in the camo tape for a while but dont like the idea of it leaving a load of sticky crap all over my gun if i decide to take it off for whatever reason.

 

However... I came up with a plan... Put a 'base tape' on, maybe masking tape??? I know for a fact this isnt as sticky as i use it all the time at work and peel it off machines after 2 or 3 weeks with no probs.

 

Do you think it would work and should i give it a go???

 

Thanks

 

Gaz

[fishfish 17]

to get the sticky off just get some printers spirit,i think its called isopropalalchohol .