advice needed please

[slyfox-mal 1]

hi everyone i am have a problem with my scope mount jumping out of the dovetail on my bsa. i just get it zeroed in and out it pops with the recoil of the mercury .

can any body please give me some advice as to what mounts to buy .

my scope is a 3-9-56 and as i have said the rail is dovetail so the mounts need to be quite high

oh ye and if they can point me in the direction of where i may get them .

many thanks in advance mal

[king 11,984]

you could do with 1 piece mount's by the sound's of it mate.

my hw90k was making the scopes creep back with the 2 piece mount's that were on it.

then i put 1 piece mount's on and it's sorted now.

[slyfox-mal 1]

any idea where i might get a set of them please

[mark01856 7]

http://www.wighillparkguns.co.uk/products/...l.asp?prod=1977

 

http://www.wighillparkguns.co.uk/products/...l.asp?prod=1978

 

some one piece mounts

[perlin 0]

Try www.jsramsbottom.com , Keighley W.Yorkshire Tel 0845 3311453

 

John

[Dave_2o08 0]

hello

[LOGUNSOLO177 0]

I have dealt with these and they are great!!!

 

http://www.targetsports.co.uk/product_info...products_id=348

[slyfox-mal 1]

thanks for all the replies i think i have found some mounts now on ebay.

now my only problem is the sizes of the rail the mounts on ebay are to fit a 9.5-11.5 rail and depending on how you measure the rail its 11.5 -13.5

how is the rail measured is it the inner most edge of the rail or the outter most i hope i am making this clear and ye i bet loads of you are calling me a proper divvy

[king 11,984]

  slyfox-mal said:

thanks for all the replies i think i have found some mounts now on ebay.

now my only problem is the sizes of the rail the mounts on ebay are to fit a 9.5-11.5 rail and depending on how you measure the rail its 11.5 -13.5

how is the rail measured is it the inner most edge of the rail or the outter most i hope i am making this clear and ye i bet loads of you are calling me a proper divvy

to measure the inner edge of the rail (in the groove)you would need something like a feeler gauge

but to measure the top of the rail you only need a tape measure.

the easy and normal way would be to measure the top of tha rail

[SteveieP 0]

Measure the grooves centre to centre & I'll bet you find it's 11mm, which is the most popular size for the dovetails.

The one piece Accushot mounts at J Ramsbott will fit the bill

[slyfox-mal 1]

thanks guys for the good advice you gave on the mounts i received some today from ebay and they are really good and fitted perfectly

they are hawke match mounts and cost me 20 quid from here

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...N:IT&ih=013

he is a nice bloke to deal with and very quick on delivery anyhow im waffling on so once again thanks to all that answered me kindest regards mal