v-max 2 Posted March 9, 2008 Report Share Posted March 9, 2008 Hello nemo as asked for here is couple pics of fram in my double door fridge. . Quote Link to post
Nemo 0 Posted March 9, 2008 Report Share Posted March 9, 2008 Hello nemo as asked for here is couple pics of fram in my double door fridge. . cheers vmax just a couple of questions is the frame stainless? and is it ok to screw to the sides as ive heard it knackers them? Quote Link to post
moley 115 Posted March 10, 2008 Report Share Posted March 10, 2008 are you making that for me to return all them favours ?, good lad Quote Link to post
v-max 2 Posted March 10, 2008 Author Report Share Posted March 10, 2008 Hello yes its all stainless. 1" flat bar & 1" angle with 3/4" solid bar with 6 1" ID pipe over the bar to slide & hang off. we made the bar neat to inside of angle with 1" ID of pipe holding it in place & had to put bar inside & slide up into place & fix. As you can see we tied into 2 holes each leg ie 4 a side & i have had 4 roe unskinned in it at a time & had no probs at all with it yet. We set the bar back 2/3rds for hanging & it works well. Quote Link to post
v-max 2 Posted March 10, 2008 Author Report Share Posted March 10, 2008 (edited) Sorry the pipe slide points are cut as you wish ours are 1" or so with stainless links cut & welded on to hang off & found 6 bits of 1" ID (internal dimention) more than enough to hang off.The roe i shoot are big too with bucks near 50lb in weight. Edited March 10, 2008 by v-max Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.