olliedakennard 0 Posted March 8, 2008 Report Share Posted March 8, 2008 Heya guys, i need some serious advice about the mk1 ferret finder and collar i just bought, when i have all the batteri4es and everything connected properly then i turn it on and nothing happens what shall i do, any tips on how to work it and how to test it all the batteries where fresh out the packet this morning. I am working at a pub tonight and wont be able to get on till late so any advice that you are going to reply to me can they be straight advice not questions as i wont be abe to reply till late many thanks. all the best ollie Quote Link to post
MikeTheDog 153 Posted March 8, 2008 Report Share Posted March 8, 2008 Clean the connections gently with some fine wet 'n dry...assuming your batteries are OK! Quote Link to post
archiekale 427 Posted March 8, 2008 Report Share Posted March 8, 2008 if it a 15 foot collar do not over tighten if its 8 foot make sure you place the battery the correct way clean inside the collar cap top but don't damage the threads did you buy it off someone you know if so get them to show you how it works Quote Link to post
stubby 175 Posted March 8, 2008 Report Share Posted March 8, 2008 with batteries in the right way round in both the locator and collar, simply turning the switch to turn it on, should start giving you a knocking noise, if it aint, it aint working Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.