Guest guevara Posted March 4, 2008 Report Share Posted March 4, 2008 Im pretty new to chokes so i was wondering what choke does what.How i understand it is that small chokes make the shot spread out more while longer chokes make it more dense and fist like.I do clay, pigeon and duck shooting and m not really sure which chokes i should use for differnt targets. Please correct me if am wrong. Regards Quote Link to post
Ratman2 2 Posted March 4, 2008 Report Share Posted March 4, 2008 My personal choice, just a guide. DTL and ABT = 3/4 and full Skeet = 1/2 and 3/4 Sporting = 1/4 and 1/2 As for wildfowling it depends on load. Quote Link to post
landrover 6 Posted March 4, 2008 Report Share Posted March 4, 2008 Its not the length of the choke that dictates the pattern its the thickness of the choke, their should be little marks on the end of the choke ie; 1 notch = full choke (tight pattern) and they go to about 5/6 notches which is improved cylinder or skeet which is a more a open pattern. ie 1/4&1/2 choke for game, use more open chokes for clays such as skeet or Tighter chokes for Down The Line = dtl,for sporting again 1/4-1/2 or what ever you prefer or are comfortable with Quote Link to post
Guest guevara Posted March 4, 2008 Report Share Posted March 4, 2008 How can i tell how many knotches it has.What should i use for game? Quote Link to post
Guest JohnGalway Posted March 4, 2008 Report Share Posted March 4, 2008 Please post topics in their appropriate sections, thank you. Quote Link to post
Ratman2 2 Posted March 4, 2008 Report Share Posted March 4, 2008 How can i tell how many knotches it has.What should i use for game? Just try counting them, that usually works. Can I advise you to join CPSA and get some coaching in the use of a shotgun. Quote Link to post
Guest guevara Posted March 4, 2008 Report Share Posted March 4, 2008 How could i count them if i did not know what they were? Quote Link to post
landrover 6 Posted March 4, 2008 Report Share Posted March 4, 2008 How could i count them if i did not know what they were? look into the barrel from the muzzle end if it as any you'll see them, if not it will show marks on the side of the choke Quote Link to post
Ratman2 2 Posted March 4, 2008 Report Share Posted March 4, 2008 How could i count them if i did not know what they were? If you tell me what shotgun you have mate, I will let you know where they are. Quote Link to post
Geoff.C 0 Posted March 4, 2008 Report Share Posted March 4, 2008 If it has no notches in the front (in between the drive slots where the tool fits) it may be a skeet or cylinder choke. Mine is like this. The others are 4 notches = 1/4 choke 3 notches = 1/2 choke, 2 = 3/4 choke and 1 = full choke. Quote Link to post
Guest guevara Posted March 5, 2008 Report Share Posted March 5, 2008 (edited) I have a browning sliver.The chokes are all warn down as its my first gun and i brought it secondhand. I have three and they all look like this http://www.midwesthuntersoutlet.com/Displa....aspx?PIC=41070 Edited March 5, 2008 by guevara Quote Link to post
Geoff.C 0 Posted March 6, 2008 Report Share Posted March 6, 2008 On their fixed choke guns, Browning stamp the choke code on the left side, rear end of the barrel. This may be found on your chokes, but I don't know for definite. You picture link does not work. Anyway, the list is = * = Full *- = Improved modified (full minus a bit, or our 3/4) ** = Modified (like our 1/2) **- = improved cylinder (1/4 ish) **$ = skeet *** = true cylinder Hope you can find some marks on the side of the chokes, as you say there is no notches in the end. Barrel sizes can be (depending on the maker) anywhere from .719" to .730" maybe even bigger in these days of back boring? So full choke will be a .040" restriction, 3/4 is .030", 1/2 is .020" and 1/4 is .010". Skeet will be about .005". Cylinder is whatever tube size it was made from. Quote Link to post
Guest guevara Posted March 8, 2008 Report Share Posted March 8, 2008 There is nothing written on the side but i found the knotches.I have2,3 and 5.What should i use for lays and what should i use for game? Regards Quote Link to post
Deker 3,478 Posted March 9, 2008 Report Share Posted March 9, 2008 There is nothing written on the side but i found the knotches.I have2,3 and 5.What should i use for lays and what should i use for game? Regards It doesn't work like that!!! There are are no chokes for hunting or clays (except perhaps Skeet where you would tend to use a short barrel and very open choke), the idea is to use the most appropriate for the individual situation and that would be down to the shooters preference!!! Best advice I can give is get looking round the web, there is lots of info around about chokes sizes and uses. Also go to your local gun dealer and get a copy of the Eley Shooters Diary, this will give you loads of info on choke, patterns/spread, distance, cartridge uses etc etc! (you may be able to find this info on the Eley web site) Deker Quote Link to post
Geoff.C 0 Posted March 9, 2008 Report Share Posted March 9, 2008 There is nothing written on the side but i found the knotches.I have2,3 and 5.What should i use for lays and what should i use for game? Regards Just checked on a mates multi choke Browning, this morning. They mark their chokes 1 to 5, with 5 being the skeet choke, then it's 1/4 = 4 notches, 1/2 = 3 notches etc up to 1 = full choke. So you have a skeet, a 1/2 & a 3/4. You can use any of these for clays or game, it is a matter of what you are shooting at, cartridge type and whether the target is coming to you or going away. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.