alun1960 234 Posted March 3, 2008 Report Share Posted March 3, 2008 Does any one know if a standard AA S410 be uprated to about 30 lbft and roughly the cost ? Cheers Alun Quote Link to post
Deker 3,478 Posted March 3, 2008 Report Share Posted March 3, 2008 Does any one know if a standard AA S410 be uprated to about 30 lbft and roughly the cost ? Cheers Alun Yep! Cost will be £50 for your FAC plus a cabinet, if you return the gun to AA to do the work it is likely to be a fair bit over £100 as FAC carriage is expensive to start with. If you want to do the work yourself you can save money and just get a kit from someone like Terry Robb...when you have your FAC!! Quote Link to post
alun1960 234 Posted March 4, 2008 Author Report Share Posted March 4, 2008 Does any one know if a standard AA S410 be uprated to about 30 lbft and roughly the cost ? Cheers Alun Yep! Cost will be £50 for your FAC plus a cabinet, if you return the gun to AA to do the work it is likely to be a fair bit over £100 as FAC carriage is expensive to start with. If you want to do the work yourself you can save money and just get a kit from someone like Terry Robb...when you have your FAC!! Thanks deker , have made things easier for me to decide , didnt want to buy the gun and find it couldnt be uprated when fac comes through . Quote Link to post
C3PO 118 Posted March 4, 2008 Report Share Posted March 4, 2008 Just be aware you'll only get around 25 shots at 30ft/lbs. Better to go for a Theoben Rapid. Quote Link to post
milo2005 0 Posted March 5, 2008 Report Share Posted March 5, 2008 Just be aware you'll only get around 25 shots at 30ft/lbs. Better to go for a Theoben Rapid. well said c3po Quote Link to post
ChrisJones 7,975 Posted March 7, 2008 Report Share Posted March 7, 2008 What is the shot capacity of the AAS410X? Is that it or does this Robb conversion involve the standard cylinder? Quote Link to post
zebedee321 0 Posted March 9, 2008 Report Share Posted March 9, 2008 What is the shot capacity of the AAS410X? Is that it or does this Robb conversion involve the standard cylinder? the tr robb kit involes the standard gun, just replaces hammer spring valve guide and seals. just have to remember to reg service gun or you get lots of wear!!! mine runs at 34 ft lbs and i get about 35-40 full power shots it is a carbine though but on a hunting trip this is more than enough!!!! you do need to upgrade the silencer i got a lovley adapter and run the hw 100 silencer and the gun sounds quieter than a sub 12ft lbs model. just the hammer spring is noisy. hope this helps john Quote Link to post
Deker 3,478 Posted March 9, 2008 Report Share Posted March 9, 2008 What is the shot capacity of the AAS410X? Is that it or does this Robb conversion involve the standard cylinder? the tr robb kit involes the standard gun, just replaces hammer spring valve guide and seals. just have to remember to reg service gun or you get lots of wear!!! mine runs at 34 ft lbs and i get about 35-40 full power shots it is a carbine though but on a hunting trip this is more than enough!!!! you do need to upgrade the silencer i got a lovley adapter and run the hw 100 silencer and the gun sounds quieter than a sub 12ft lbs model. just the hammer spring is noisy. hope this helps john That is seriously impressive and obviously a very special tuning job as it is dramatically better than AA suggest is possible!!! AA suggest for the Carbine: Up to 24ft/lbs 32.5joules .22 (5.5mm) only FAC shots 20 per 200bar fill FAC filling pressure 200bar maximum Quote Link to post
ChrisJones 7,975 Posted March 11, 2008 Report Share Posted March 11, 2008 I was lead to believe that the S410X had a much larger cylinder to cope with the extra ft/lbs? Quote Link to post
zebedee321 0 Posted March 11, 2008 Report Share Posted March 11, 2008 the tr robb kit involes the standard gun, just replaces hammer spring valve guide and seals. just have to remember to reg service gun or you get lots of wear!!! mine runs at 34 ft lbs and i get about 35-40 full power shots it is a carbine though but on a hunting trip this is more than enough!!!! you do need to upgrade the silencer i got a lovley adapter and run the hw 100 silencer and the gun sounds quieter than a sub 12ft lbs model. just the hammer spring is noisy. hope this helps john That is seriously impressive and obviously a very special tuning job as it is dramatically better than AA suggest is possible!!! AA suggest for the Carbine: Up to 24ft/lbs 32.5joules .22 (5.5mm) only FAC shots 20 per 200bar fill FAC filling pressure 200bar maximum 09 Q. Can my standard power rifle be upgraded to high power? All of the Air-Arms spring gun range can be upgraded to high power. The S300/310 range can be upgraded to a point but Air Arms do not carry this work out. We consider the power gain and loss of shots per charge not to be worthwhile, that is why we designed a purpose built high powered model capable of 35-40 ft/lbs and giving 35-40 shots. On the S400/410 range of rifles the power is slightly lower at between 29-33 ft/lb with the aduster fully open and 7ftlb closed. the above was taken straight from the AA web site and although i do not recomend it to others i personally charge my rifle to 230bar and i find that this gives me extra shots. Quote Link to post
stork 1 Posted March 11, 2008 Report Share Posted March 11, 2008 thre is one in my local gun shop for 475 quid on fac a aa s410 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.