End pins

[Elchapo 3,167]

Does anyone know where I could buy a couple stainless steel end pins for some  gates nets from ,cheers 

 

[smithie 2,443]

Nelson did sell them once over or maybe fourteenacre

[terryd 8,519]

Or just ask your local metal guy to knock couple up. For a gate net though I just use couple wood pegs though they don’t handle stoney rock hard gateways well but you can all ways manage as a rule and find somewhere to pop them in or tie to something 

[jok 3,269]

What length would you need? I have 3 lengths, stainless, 1 metre x , I think, 5/6 mom. You would be welcome to them. I can cut them to length for easier packaging. Jok.

[Elchapo 3,167]

1 hour ago, jok said:

What length would you need? I have 3 lengths, stainless, 1 metre x , I think, 5/6 mom. You would be welcome to them. I can cut them to length for easier packaging. Jok.

My other 1s were 12 " mate cheers 

[jok 3,269]

That didn’t really answer the question. Jok.

[Elchapo 3,167]

11 minutes ago, jok said:

That didn’t really answer the question. 

Need 10 pieces of 12" 5/6 mm thick 

[jok 3,269]

Ok I’ll have a measure and let you know. I will say that I only have 3 lengths so might not make 10 lengths. Will let you know shortly. Excuse the pun. Jok

[Elchapo 3,167]

Lol No worries mate 

[jok 3,269]

Ok. Each length is45 inches. You require 10 pieces so obviously 5 gate nets. You tell me how you want them cutting please. Jok.

[Elchapo 3,167]

If you could cut 8 at 11" at 2 at 12" that would be great thanks 

[jok 3,269]

Ok will do. They’ll be done in the morning. Perhaps you could pm me regarding postage etc. Jok.

[jok 3,269]

Done. Bit of mixed lengths but should do you well. Jok.

[Elchapo 3,167]

Pm on way 

[jok 3,269]

They have been posted. Jok.