stubby 175 Posted February 6, 2008 Report Share Posted February 6, 2008 hi all, Im after something to stick onto a log burning stove, 4" diameter and about 3mtrs length, either cast iron pipe ,would then need a couple of 45 degree bends, or better still some of that corrigated ali chimney flu stuff could kick myself cos saw some on a skip and forgot to get it on way home and of course, within traveling distance to essex Link to post Share on other sites
moxy 617 Posted February 6, 2008 Report Share Posted February 6, 2008 I wouldnt reccommend cast iron, When you get it up to temperature and it rains it WILL crack. I know that flu lining aint cheap and you will be looking at £70 + plus vat per metre and thats unlagged, Bends will be about £40-£50 each. You should be able to get all these parts at your local plumbers merchants if they are any good. I think you will struggle to find any second hand bends and connectors so you may have to buy new, or position your stove so you dont need any or very few at least. Traul the scrapyards in your area, you may be pleasantly surprised!! I got some stainless steel lagged pipe for mine at £20 per metre but at the time the price of scrap stainless was quiet high. Hope this helps and good luck Oh by the way DONT use that alley stuff it will melt!!!!!!!!!!! Link to post Share on other sites
jonesy 111 Posted February 6, 2008 Report Share Posted February 6, 2008 Get it all the time,as im a scrapman,aproach a scrapman as by the time it gets to a scrapyard it will probs have been flattened makes it easier to transport. Link to post Share on other sites
antg 1,755 Posted February 6, 2008 Report Share Posted February 6, 2008 machine mart sell all the bits to make up the flew Link to post Share on other sites
Coney 3 Posted February 6, 2008 Report Share Posted February 6, 2008 Stubby Log onto www.fluestore.com this supplier has the lot and not to badly priced. Hope this helps Coney. Link to post Share on other sites
earth&hounds 94 Posted February 7, 2008 Report Share Posted February 7, 2008 have a word with woz mate on here he will sort you one out he is a ace with that sort of stuff makes stuff for bow tops and barges making me a wood burning stove for the shed (this is not a bump) Link to post Share on other sites
Recommended Posts