king 11,984 Posted March 21, 2024 Report Share Posted March 21, 2024 9 minutes ago, poxon said: Anything I want to do or want to see how it’s done I use utube it’s a brilliant tool for insight an information.Good on ya mate that’s the way gotta have a crack your self if not your paying silly prices for someone else to do it Some garages want £70 and hour.feck paying them that mate. Like you say have a go yourself.. 1 Quote Link to post Share on other sites
Daniel cain 47,075 Posted March 21, 2024 Report Share Posted March 21, 2024 Watched a few YouTube videos, and I fitted a new turbo to my old Rav last summer...been spot on ever since...few yrs ago I would of payed someone else mate, bought a little fault code reader,handy as f**k 1 Quote Link to post Share on other sites
king 11,984 Posted March 21, 2024 Report Share Posted March 21, 2024 Them obd code readers are a great bit of kit mate.. 2 Quote Link to post Share on other sites
poxon 5,847 Posted March 22, 2024 Author Report Share Posted March 22, 2024 Party time hope they turn out half decent burnt bronze is the colour I went for 2 Quote Link to post Share on other sites
poxon 5,847 Posted March 22, 2024 Author Report Share Posted March 22, 2024 There the excel rims I’ve had powder coated 2 Quote Link to post Share on other sites
mC HULL 14,497 Posted March 22, 2024 Report Share Posted March 22, 2024 19 hours ago, king said: Them obd code readers are a great bit of kit mate.. loads a shite mate best value the launch ones Quote Link to post Share on other sites
poxon 5,847 Posted March 23, 2024 Author Report Share Posted March 23, 2024 4 Quote Link to post Share on other sites
king 11,984 Posted March 23, 2024 Report Share Posted March 23, 2024 21 hours ago, mC HULL said: loads a shite mate best value the launch ones Just looked at the price on them mate £450 + feck that lol.. Quote Link to post Share on other sites
king 11,984 Posted March 23, 2024 Report Share Posted March 23, 2024 46 minutes ago, poxon said: They turned out well mate..did you respoke them yourself.. Quote Link to post Share on other sites
poxon 5,847 Posted March 23, 2024 Author Report Share Posted March 23, 2024 8 minutes ago, king said: They turned out well mate..did you respoke them yourself.. Yes mate bit fiddly and time consuming 3 Quote Link to post Share on other sites
tillylamp 1,853 Posted March 24, 2024 Report Share Posted March 24, 2024 9 hours ago, poxon said: Yes mate bit fiddly and time consuming nice job bud, when you respoke a wheel is it easy to over tighten them.... 1 Quote Link to post Share on other sites
poxon 5,847 Posted March 24, 2024 Author Report Share Posted March 24, 2024 8 hours ago, tillylamp said: nice job bud, when you respoke a wheel is it easy to over tighten them.... Cheers fella I done these ones all even hand nipped up then marked the first spoke up with a bit of masking tape near we’re the valve for the inner tube then tightened every 3 spokes quarter of a turn with a spoke key till I’m back to the original spoke then add another bit of tape to the next spoke and go round every 3 again till the beginning this process is repeated 4 times you don’t have to wrench on the spokes just nip them bit by bit evenly or when you come to true the wheel on a trueing stand it’ll be all over the shop up down side to side you gotta remember if your over tighten say 12 o’clock 6 o’clock will be tighter. For correct tightness I done a sound test with a pencil run over the spokes they should all sound the same sound 1 Quote Link to post Share on other sites
tillylamp 1,853 Posted March 24, 2024 Report Share Posted March 24, 2024 6 hours ago, poxon said: Cheers fella I done these ones all even hand nipped up then marked the first spoke up with a bit of masking tape near we’re the valve for the inner tube then tightened every 3 spokes quarter of a turn with a spoke key till I’m back to the original spoke then add another bit of tape to the next spoke and go round every 3 again till the beginning this process is repeated 4 times you don’t have to wrench on the spokes just nip them bit by bit evenly or when you come to true the wheel on a trueing stand it’ll be all over the shop up down side to side you gotta remember if your over tighten say 12 o’clock 6 o’clock will be tighter. For correct tightness I done a sound test with a pencil run over the spokes they should all sound the same sound thank for explaining that bud, i have an old motorbike here that has some spokes missing from the back wheel that has a buckle when it's spun round, could it look buckled because of the missing spokes..... Quote Link to post Share on other sites
twobob 1,498 Posted March 25, 2024 Report Share Posted March 25, 2024 On 21/03/2024 at 08:57, poxon said: Any of you lads ever done any ceramic coatings on guns/cars/motorcycle's? I’m gunner be having a go at coating some billet wheel hubs at the weekend it’ll be my first time using the stuff I’m a little nervous because I want to make a really good professional job of it I’ve glass media shot the hubs in the sand blast cabinet keeping the bearings an dust seals in so to not play with tolerances I’ve degreased them then baked them in the oven repeated twice to make sure for no grease I’m looking for any hints an tips would be appreciated? I think this is a good a place as any as I know many on here are car/bike and gun guys Air cured or oven cured put your parts in a way you can pass even when spraying its not the same as powder maybe mask or bung anywhere you dont want paint good luck 1 Quote Link to post Share on other sites
twobob 1,498 Posted March 25, 2024 Report Share Posted March 25, 2024 On 23/03/2024 at 14:00, poxon said: They look good 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.