Bullyhunt 0 Posted February 4, 2008 Report Share Posted February 4, 2008 hiya whats the lowest bar pressure before the power drops on an s400/410??? jordan Quote Link to post
gazandjen 54 Posted February 5, 2008 Report Share Posted February 5, 2008 I don't go below about 100.Lower than this and it starts to drop a little The seals will release air faster the lower you go. Plus I have a hand pump and pumping from below 100 is a Quote Link to post
rob reynolds uk 3 Posted February 5, 2008 Report Share Posted February 5, 2008 id say 100 too ,get below 50 and it will dump all your air .i pump mine up to 200 ,but it dont like it 190 is best really .. Quote Link to post
Bullyhunt 0 Posted February 5, 2008 Author Report Share Posted February 5, 2008 nice one bth of you just what i needed to know! Quote Link to post
milo2005 0 Posted February 5, 2008 Report Share Posted February 5, 2008 aa 400/410 are reged so about 100 bar Quote Link to post
stillair1 16 Posted February 7, 2008 Report Share Posted February 7, 2008 aa400/410 can be regged, but its not a std fitment. iirc the peak of the curve is around 160 bar. Neil Quote Link to post
Coney 3 Posted February 7, 2008 Report Share Posted February 7, 2008 Wouldn't recommend you go below 90. Quote Link to post
andy s410c 59 Posted February 7, 2008 Report Share Posted February 7, 2008 I keep my 410c between 140-180 bar i find thats when it is most consistent,as previously quoted i think they dump their air at 50 bar not recommended...... Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.