mC HULL 12,372 Posted November 19 Report Share Posted November 19 11 hours ago, paulus said: Stripped the engine down on the Gadabout Mk3 Deluxe. As you can see from the picture one head bolt is bent, the sprung steel pin is rusted into two pieces, The whole thing had been in the rain with no spark plug fitted at some point in its life, as there was rust coloured orange oil and staining everywhere, The barrel is pitted, possibly unsalvageable as the head is in the bin due to bad fracturing, made a start on cleaning up what i can and have spent a couple of hours trying to find parts, The difficulty is there are so many variant's of this engine that most parts advertised are incorrectly identified, Luckily this is a three speed engine and was only manufactured in 1959 and then only for a short period, being sold into early 1960. be steel sleeve in the barrel won’t it mate ? i send to langcourts there descent Quote Link to post Share on other sites
paulus 26 Posted November 19 Report Share Posted November 19 2 hours ago, mC HULL said: be steel sleeve in the barrel won’t it mate ? i send to langcourts there descent Yes but i have found a replacement head and barrel for i think less than the cost of having it done. Going to have a pop at getting the other one running later now i have found the ignition timing advance figure. Quote Link to post Share on other sites
vfr400boy 3,340 Posted November 25 Report Share Posted November 25 Am on the look out for 2 tyres tubes n rim tape for my 1972 pc50 am doing Johno grotes to lands end on it again next year and its on tyres from the 80s ha the size is 2.19 front and 2¼ 19 rear , any one know were I will get a set ? 3 Quote Link to post Share on other sites
mC HULL 12,372 Posted November 25 Report Share Posted November 25 1 hour ago, vfr400boy said: Am on the look out for 2 tyres tubes n rim tape for my 1972 pc50 am doing Johno grotes to lands end on it again next year and its on tyres from the 80s ha the size is 2.19 front and 2¼ 19 rear , any one know were I will get a set ? give steve’s spares a shout mate think he only posts now but he has lots of old stuff 1 Quote Link to post Share on other sites
greg64 2,818 Posted November 26 Report Share Posted November 26 (edited) 15 hours ago, vfr400boy said: Am on the look out for 2 tyres tubes n rim tape for my 1972 pc50 am doing Johno grotes to lands end on it again next year and its on tyres from the 80s ha the size is 2.19 front and 2¼ 19 rear , any one know were I will get a set ? Honda PC 50 1972 KKS 10 2-19 Rear Tyre | eBay Fits Honda PC 50 K1 EU 1979 Tyre - Heidenau - Front 225-19 | eBay Edited November 26 by greg64 1 Quote Link to post Share on other sites
poxon 5,725 Posted November 26 Author Report Share Posted November 26 16 hours ago, vfr400boy said: Am on the look out for 2 tyres tubes n rim tape for my 1972 pc50 am doing Johno grotes to lands end on it again next year and its on tyres from the 80s ha the size is 2.19 front and 2¼ 19 rear , any one know were I will get a set ? How cool is that 1 1 Quote Link to post Share on other sites
vfr400boy 3,340 Posted November 26 Report Share Posted November 26 5 hours ago, poxon said: How cool is that Iv had loads of bikes well still got a few but non of them make me smile ( and sometimes laugh) as much as this one they just so funny, am on with decorating it with a 6ft Christmas tree and lights for our town light switch on at the weekend 2 Quote Link to post Share on other sites
vfr400boy 3,340 Posted Sunday at 18:09 Report Share Posted Sunday at 18:09 Be safe be seen ,,,,,,,,,,, 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.