Shorgun62

[Shogun62 1]

Hi I have just changed all batteries in mk 1 knocker box and nothing any one help please 

[neil b 2,296]

Loose wire possibly?? Solder?? 

[BEARINATOR 2,867]

Loose wires or something corroded, will be repairable as built to last the mk1 

[brambles 3,192]

Sometimes the collars pack up mate due to over tightening

[Arry 21,642]

Test the batteries with a meter it's not unknown to have a new battery thats dud. Turn the box on put in near a TV that is on if no static you have a duff connection somewhere. 

Take the screw out of the middle of the on/off depth wheel then remove the mother board out and look for broken wire.

(Little tip when resembling and putting the screw back in put little dab of wifey's nail varnish on the screw to stop it coming loose out in the field.)

If you have static near TV then check the collar batteries. Clean the copper pin in the centre of the collar with emery nail file.

The most common fault with Mk1 box in my option is usually the on/off switch depth control they can be bought from eBay but are little trick to desolder, and is best to desolder and remove the speaker to do this job. 

Hope this might help.

Cheers Arry

Edited November 20, 2023 by Arry

[The one 8,473]

Clean box , collar battery terminals