Jump to content

are under lever rifles any good ?.


Recommended Posts

so about 2013 i got me a pre remlin .357m marlin.about 4 years later the carrier broke and i could not get a spare anywhere.eventually i guy down south made some parts and it was fixed.2 years later my .44m pre remlin marlin broke.not impressed with marlin as that is 100% failure.so in 2018/2019 i bought a brand new henry big boy steel in .357m and that has now broken aswell.so all three have let me down.all guns cleaned and not abused and i use reloads that are towards the starting loads for competition shooting.are chiappa,winchester,rossi worth trying are all under levers crap ?.

  • Like 1
Link to post

I’ve always had a soft spot for an 1895 Winchester. I’ve never been lucky enough to find one on the local racks. I’m a Marlin diehard, but a lever gun in 30-06 is just too cool.

Ditto for the ‘97 Winny 12ga. That huge Winchester logo on the receiver is just the schnitz.

Link to post
  • 2 weeks later...

Russia bought Winchester 1895s as an emergency for ww1 they gave most of them to troups they didn`t trust as well, to the Finns and Estonians, many rifles broke down. Leveractions had their time as military weapons in the 1860s-1870s after the centerfire bolt action came in the 1870s no military leveraction were sold if it wasn`t an emergency.

Link to post

I purchased a Rossi 24in stainless octagonal barrel 38/357 underlever in 1998 still in excellent condition and never had any problem with it.
only minor setback is it's a model 1894 with top eject so mounting a scope is somewhat of a problem, but I shoot it with an aperture sight.
It`s my 25m /50m rifle and it is very accurate.

Link to post
On 01/12/2023 at 19:21, elf847 said:

I purchased a Rossi 24in stainless octagonal barrel 38/357 underlever in 1998 still in excellent condition and never had any problem with it.
only minor setback is it's a model 1894 with top eject so mounting a scope is somewhat of a problem, but I shoot it with an aperture sight.
It`s my 25m /50m rifle and it is very accurate.

how many rounds do you shoot in a year ?.have heard that the rossi is built to withstand greater chamber pressures.

Link to post
  • 5 weeks later...

Are the breakages the same part.  They can't all be faulty,  The design has been around since the 1800s so the most likely fault is you.  you're the weakest link. the common denominator.

Link to post

marlins were the carrier on the 44m and the .357m.but that was my fault as it is a known part to fail🙄.the henry has been the rear part of the firing pin and now the front part has broken.again this is a known fault.the shop should have changed both parts but did not.but again all my fault for buying the gun in the first place.just for laughs i had a timney trigger put in my .223 rem and that broke but that must have been my fault aswell i suppose.the firing pin broke on that rifle aswell but again that was my fault.bit like my hw98 that broke from new within 300 shots my fault.had a tune done on the same gun and that fecked up but that was my fault.or i suppose it was my fault that again from brand new that my fx was faulty straight from the shop.suppose my a300 broke because i had not even fired it but still my fault.trying to think of all the other air rifles pistols and shotguns that have broke over the years but i allready know the answer is it is my fault.cheers.

Link to post
  • 3 months later...

I've the rossi puma in 44 magnum, with the octagonal barrel. 

Touch wood it's never skipped a beat, it my favourite rifle by far and have put a fair few hundred rounds through it. 

 

Good luck chap

Link to post
  • 1 month later...
On 12/11/2023 at 09:27, .357shooter said:

so about 2013 i got me a pre remlin .357m marlin.about 4 years later the carrier broke and i could not get a spare anywhere.eventually i guy down south made some parts and it was fixed.2 years later my .44m pre remlin marlin broke.not impressed with marlin as that is 100% failure.so in 2018/2019 i bought a brand new henry big boy steel in .357m and that has now broken aswell.so all three have let me down.all guns cleaned and not abused and i use reloads that are towards the starting loads for competition shooting.are chiappa,winchester,rossi worth trying are all under levers crap ?.

I know this is an older post. But Marlin lever action rifles are known here to be among the sturdiest rifles. How exactly are they breaking on you? Is it from impact, or general use?

 

ATB

Link to post

The carrier broke on the .357 and I could not get another for sale anywhere.uk no, Europe no and the USA would not export one it was sat aside for 6 months until one was made out of stainless in the UK .the 44 had the same fault and I just scrapped it.all just broke through normal use.the Henry has broken both firing pins and now a spring that connects them.now told that many other parts are inline to also fail.crossbar safety for one.

Link to post
  • 1 month later...

I have a rossi R92 in 357 and it's been good so far, ditto my 1894 win in 30/30 and my 308 blr and, most recently, a 22 hi power savage 99.

I think a great deal of the problems with lever guns arise because of b.s. on the internet generally originating in the US where they seem to have a thing about filing this off or polishing that up all to the detriment of the gun.

I think a significant issue with lever guns is the attitude of the owners, particularly gen Z who seem to want to blame everything , but that's just me.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...