cs125 drain tracer kit mk3/ferret finder deben

[cs125 drain tracer kit mk3 0]

hello group I lost the metal part  inside my transmitter from my cs125 drain tracer kit mk3/ferret finder so now the transmitter isn’t sending a signal.any ideas on how to do a diy job on getting my transmitter working again.I tried some tin foil on the hearing aid batteries and the small metal contact where my pen is pointing to and the receiver beeps every time I press down on the small metal contact in the transmitter.I also tried a screw in the transmitter to make a contact.see my pictures shows my failed diy job attempt.

[cs125 drain tracer kit mk3 0]

1 minute ago, cs125 drain tracer kit mk3 said:

hello group I lost the metal part  inside my transmitter from my cs125 drain tracer kit mk3/ferret finder so now the transmitter isn’t sending a signal.any ideas on how to do a diy job on getting my transmitter working again.I tried some tin foil on the hearing aid batteries and the small metal contact where my pen is pointing to and the receiver beeps every time I press down on the small metal contact in the transmitter.I also tried a screw in the transmitter to make a contact.see my pictures shows my failed diy job attempt.

 

[TOMO 26,127]

I also have lost that T shaped piece of thin metal from one of mine...

I replaced it with a thin piece of metal contact from a cheap little torch that cos a quid from pound shop...

Be carefull how much super glue you use to keep it in place..as the glue raises the hight of the metal...and makes it hard to screw the cap back in line