A new old addition...........

[villaman 9,983]

1 hour ago, philpot said:

What weight are those Mitch, I thought that make was no longer made.

You can  still buy marksman Phil 

[villaman 9,983]

The bore is very tight . Rhino are the only ones which fit in fashion. I am thinking about fitting .25 lighting barrel which is .25 not the old measurement 

[villaman 9,983]

This are not to bad 

[Dervburner 2,549]

1 hour ago, villaman said:

This are not to bad 

I used to use those in mine, pylarm and rhino were the ones I could source easily. No eBay or anything like that back then. I used the rifle for shooting ferals in factories for which it was very effective. Sold it along with a Diana 52 and a venom custom bsf b55

[Jonjon79 13,358]

3 hours ago, Dervburner said:

I bought one of these new in the nineties. The bore is tight (.243) on them. Some pellets, such as h&n ram point wouldn’t even fit in the breech. The original milbro rhino’s fitted well but are no longer made I believe?

In that case, you might be the man to ask........... what does the little grub screw do above the transfer port?

 .......... it's just behind and above the breech, on the spring cylinder side of the opening.

[villaman 9,983]

2 minutes ago, Jonjon79 said:

In that case, you might be the man to ask........... what does the little grub screw do above the transfer port?

 .......... it's just behind and above the breech, on the spring cylinder side of the opening.

Adjust the power 

[Jonjon79 13,358]

12 minutes ago, villaman said:

Adjust the power 

What does it do? Just open and close the transfer port?

[villaman 9,983]

Just now, Jonjon79 said:

What does it do? Just open and close the transfer port?

Yes basically if I remember right there are 3 settings 

[Jonjon79 13,358]

9 minutes ago, villaman said:

Yes basically if I remember right there are 3 settings 

Hmm, sounds like that's worth messing about with