markieboi 0 Posted January 28, 2008 Report Share Posted January 28, 2008 hi guys i have seen on some post these being held by stones does anyone have pics of how there used or vidios, cheers mark Quote Link to post
Rolfe 2 Posted January 30, 2008 Report Share Posted January 30, 2008 markieboi said: hi guys i have seen on some post these being held by stones does anyone have pics of how there used or vidios, cheers mark You can use small stones to hold the net on the gate rails..........but not the reccomended method. Much simpler and quicker is to hold the net up on a couple of hazel wands. Rolfe. Quote Link to post
TOMO 27,329 Posted January 30, 2008 Report Share Posted January 30, 2008 GET HOLD OF SNAREMANS EXCELLENT FILM ON GATE NETTING, ALL THE DIFRENT TYPES OF GATE NET ARE, COVERED Quote Link to post
J Darcy 5,871 Posted January 30, 2008 Report Share Posted January 30, 2008 Just run it like a mini long net. simple. Quote Link to post
DUCKWING 302 Posted January 30, 2008 Report Share Posted January 30, 2008 J Darcy said: Just run it like a mini long net. simple. BELIVE ME , THERES NOTHING SIMPLE ABOUT GATENETTING .......... WHEN DONE PROPERLY ... ITS AN ART ! GLEN WATERS DVD ON GATE NETTING HAS BEEN THE ONLY INFORMATION WORTH HEEDING ... EVER .... IMO ALL THE BEST DUCKWING Quote Link to post
ianrob 2 Posted January 31, 2008 Report Share Posted January 31, 2008 (edited) markieboi said: hi guys i have seen on some post these being held by stones does anyone have pics of how there used or vidios, cheers mark Hi mate, you're talking way back. original gate nets were square mesh, usually 3 1/4" knot to knot. Perhaps a couple of feet wider than the gate and five or six feet high. The net was laid on the ground on the field side for a couple of feet and held on the gate with a couple of stones. This was in the days of small farm gates made out of timber, so the stones idea was fine. These nets were just a rectangle of net nothing fancy. Most gates today are tubular galvanised steel not good for balancing stones, so far better nowadays to make a short longnet, you can go to 3 1/4" knot to knot or 6 1/2" full mesh. I assure you this is a good size, but make the net 16 mesh wide and double up the net, ie 20 yards on ten yards of running line. My net is 15 yards long and is very effective. You can use two pegs 30" long instead of the 25" rabbit longnet pegs. It pays to have someone near the net in hiding as you push the hares in, as they 'll scream like a banshee once caught. You need it made of strong twine, 4 or 5 ply hemp or spun nylon. I've had a good few in mine, so they're well worth a go, I have an old style one too which I sometimes stick in my pocket, easy to hide as you need no pegs.. Good luck. Edited January 31, 2008 by ianrob Quote Link to post
ianrob 2 Posted January 31, 2008 Report Share Posted January 31, 2008 If any of my info is contradicted by Glenns video, then I bow to his expert knowledge. I can however say with confidence, My method catches hares. ian. Quote Link to post
markieboi 0 Posted February 13, 2008 Author Report Share Posted February 13, 2008 ahh reading that to my self now makes sense cheers buddy Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.