Kennel base

[Moocher71 4,050]

Gof to make a new concrete base sit kennel on ,how much concrete you think I need for 1o ft x 10 ft 

 

[Kalibrgun 995]

Near enough a cubic meter at 4" and about 1.4cube at 6"

Edited September 20, 2022 by Kalibrgun

[THE STIFFMEISTER 16,367]

 

[THE STIFFMEISTER 16,367]

[monkey 450]

15 hours ago, Moocher71 said:

Gof to make a new concrete base sit kennel on ,how much concrete you think I need for 1o ft x 10 ft 

 

Ring the concrete company tell them the size of the base and the depth you want and they will tell you exactly how much  you need 

[Dennis up 84]

Don't make the mistake I made.... I've a pal who works for cemex and I asked what strength the cement ratio should be? 

Unfortunately I'd already done it and now the piss and jet wash has fecked it I've now got to redo it. 

Apparently it's a very strong mix 

[Moocher71 4,050]

6 hours ago, Dennis up said:

Don't make the mistake I made.... I've a pal who works for cemex and I asked what strength the cement ratio should be? 

Unfortunately I'd already done it and now the piss and jet wash has fecked it I've now got to redo it. 

Apparently it's a very strong mix 

I'm getting my mate to do it ,I'd fcuk it up  

[Gypsydog94 4,629]

8 hours ago, Dennis up said:

Don't make the mistake I made.... I've a pal who works for cemex and I asked what strength the cement ratio should be? 

Unfortunately I'd already done it and now the piss and jet wash has fecked it I've now got to redo it. 

Apparently it's a very strong mix 

Can you resin it? 

[Dennis up 84]

29 minutes ago, Gypsydog94 said:

Can you resin it? 

Not sure I know what that is? Do you have any info on it?

[Ferretman65 2,271]

On 20/09/2022 at 07:52, Moocher71 said:

Gof to make a new concrete base sit kennel on ,how much concrete you think I need for 1o ft x 10 ft 

 

Get a mix off 40 Newton nice an wet so u can work with it that will do the trick 4 inches Deep the concrete boys will tell you much you need with the size you give them 

[Gypsydog94 4,629]

2 hours ago, Dennis up said:

Not sure I know what that is? Do you have any info on it?

@Daniel cainwill have a better idea then me chap 

[Daniel cain 46,719]

2 minutes ago, Gypsydog94 said:

@Daniel cainwill have a better idea then me chap 

Stavros is the man for the resin can you not use that industrial floor paint to seal the floor and stop it breaking up any more?had a base down in my garden for 18 yrs, every 5 yrs lick of that grey floor paint and it's sorted

[Dennis up 84]

19 minutes ago, Daniel cain said:

Stavros is the man for the resin can you not use that industrial floor paint to seal the floor and stop it breaking up any more?had a base down in my garden for 18 yrs, every 5 yrs lick of that grey floor paint and it's sorted

I used a concrete stabiliser / sealer when I realised my mistake, but it's pretty much up it I think, it's a mare to clean and the holes left by the gravel coming out are holding water /piss! the resin maybe an option depending on cost compared to re screeding it? 

[Mother_Mary 844]

28 minutes ago, Dennis up said:

I used a concrete stabiliser / sealer when I realised my mistake, but it's pretty much up it I think, it's a mare to clean and the holes left by the gravel coming out are holding water /piss! the resin maybe an option depending on cost compared to re screeding it? 

Tile it?

[Daniel cain 46,719]

1 hour ago, Dennis up said:

I used a concrete stabiliser / sealer when I realised my mistake, but it's pretty much up it I think, it's a mare to clean and the holes left by the gravel coming out are holding water /piss! the resin maybe an option depending on cost compared to re screeding it? 

I've done concrete printing,not done the resin stuff,what about 600 x 600 floor tiles?be cheapest option,plenty of SBR on them stop them moving