BenBhoy 4,706 Posted June 10, 2022 Report Share Posted June 10, 2022 I lent an air rifle to my dad, as he's getting rats on bird feeder. Now my dad is not into shooting at all. He's just phoned to say he "thinks" he's got 3 pellets stuck up the barrel.... I'll pick it up weekend- what do people suggest? Its only a £250 stoeger so I don't wanna spend a wedge sending to someone. Any advice appreciated (and no he won't be left unsupervised again!) Quote Link to post
barrywhite 282 Posted June 10, 2022 Report Share Posted June 10, 2022 push them out with a long piece of brass rod if you can get some, or straitened out a coat hanger or similar wire BUT COAT THE WIRE WITH ELECTRICAL TAPE OR SIMILAR so as not to damage the barrel . This is what I would do and have done I am not saying this is the correct method , 2 Quote Link to post
villaman 9,983 Posted June 11, 2022 Report Share Posted June 11, 2022 Buy some cheap cleaning rods Quote Link to post
villaman 9,983 Posted June 11, 2022 Report Share Posted June 11, 2022 Or something like this for about £6 13PC CABLE ACCESS KIT 10x330mm RODS ELECTRICIANS PULLER RODS + ACCESSORIES EL111 WWW.EBAY.CO.UK 10 x 330mm glass reinforced polyester rods. glass reinforced polyester rod set for gaining... Quote Link to post
BenBhoy 4,706 Posted June 11, 2022 Author Report Share Posted June 11, 2022 Right, I've got 3 pellets out easy using .17 cleaning rod. But there's something up with trigger. The rifle isn't firing at all and trigger seems loose (sloppy like dad said). In his defence I think this trigger issue must have happened, didn't fire & he re cocked it....twice!! I only got it on Monday new. Any ideas if I can DIY fix it? Shop is an hour away... Quote Link to post
Dervburner 2,549 Posted June 11, 2022 Report Share Posted June 11, 2022 Is it still cocked Ben? Does it have auto safety and if so, has the safety catch stuck in the safe position? It might be worth taking the stock off and having a look if the trigger axis pin has come out at one end allowing the trigger to float and not engage with the sear. If there’s nothing obvious, I’d take it back to the shop if you’ve only just bought it. Quote Link to post
BenBhoy 4,706 Posted June 11, 2022 Author Report Share Posted June 11, 2022 Hi mate, no it's manual safe that's fine. It's not cocked & bolt goes forwards & back but that too feels kinda slack. I'll try text you a video of it mate 1 Quote Link to post
philpot 4,971 Posted June 12, 2022 Report Share Posted June 12, 2022 I only know of two people with these Ben and both are utter shite. I would take it back and swap for something else to be honest. Phil 1 1 Quote Link to post
BenBhoy 4,706 Posted June 12, 2022 Author Report Share Posted June 12, 2022 Tbh Phil it's just to clear up a few pests in shed, nothing too tricky- just need it to work! Quote Link to post
BenBhoy 4,706 Posted June 30, 2022 Author Report Share Posted June 30, 2022 7 hours ago, Foxdropper2 said: Even shite needs to work though Ben It's back with GMK.... Still waiting 1 Quote Link to post
David.evans 5,323 Posted July 8, 2022 Report Share Posted July 8, 2022 I’d melt it down and turn it into a caterpult 2 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.