Jump to content

Recommended Posts

Well I can't hit a barn yet though I have moments where I pull off a couple of tidy shots but just not consistently. Sticking with targets until I get sorted. In the mean time I keep knocking up some basic forks in case I make a wonder fork that can't miss lol. Some of the naturals I see around are a work of art but for the time being its ten minutes with a pen knife.
Bit black where it caught fire in the microwave ?

IMG_8962.jpg.91c490a3672df147a4db7ccc59cf1645.jpg

IMG_8964.jpg.8eb3443f0991dcd95a4712f212419498.jpg

IMG_8965.jpg.91142abdb3734d6a9f09389dabc6a743.jpg

  • Like 5
Link to post
Share on other sites

Looks like offset fork ter id really try and get ya hands on a good ash set if u can them offset forks are ok but i find you get alot of ramdom flyers with them. If u get stuck for a good bit of ash let me know and ill send ya a couple.

  • Like 1
Link to post
Share on other sites
9 hours ago, C.green said:

Looks like offset fork ter id really try and get ya hands on a good ash set if u can them offset forks are ok but i find you get alot of ramdom flyers with them. If u get stuck for a good bit of ash let me know and ill send ya a couple.

Off set as one side smaller than the other or wonky handle ? I was thinking that mate because  I tried it yesterday and yea fliers every where lol so was a thumbs down :( 

Edited by terryd
Link to post
Share on other sites

lovely fork!

it helps if you can find what outer fork width you are most accurate with, mine it seems to be 100mm so i tried cutting a bit of hazel fork down to exactly that and  im just as accurate with my 100mm outer natty as my 100mm outer custom frame.

anything under 100mm like 90mm 80mm etc and my shots go much higher that I want [shooting gangster style]

 

  • Like 1
Link to post
Share on other sites

@ger2020 is 100% correct without finding your suited fork width your pissing into the wind ?? and your suited ttf and ott fork width will more than likely be different ? my ott is 90mm and my TTF is 100mm .find your suited fork width and your comfortable natural anchor point ( keep your anchor the same always) and I can guarantee your shooting improves 10 fold in a couple of hours ???????????

  • Like 2
Link to post
Share on other sites

Cheers folks that is very interesting. Regarding anchor point I have found I am better if I dont pull too far back and get tight into my cheek. Had a bit of success last couple of nights. Still  plenty off target but a few nice hits and starting to bring it in a bit

Edited by terryd
  • Like 1
Link to post
Share on other sites

What bands are you folks using then ?
I have got 25/20 18 active bands and no idea where they fall in the scheme of things. I draw back to my cheek and the final inch gives me a bit of a wobble. I also have some old bands that I have pull to far back. Once I go past my cheek I am all over the place aim wise. I can now hit a 410 cartride case at about 10 yards or so after a few goes. Things are getting better slowly with a few shots every night

  • Like 1
Link to post
Share on other sites
20 hours ago, terryd said:

What bands are you folks using then ?
I have got 25/20 18 active bands and no idea where they fall in the scheme of things. I draw back to my cheek and the final inch gives me a bit of a wobble. I also have some old bands that I have pull to far back. Once I go past my cheek I am all over the place aim wise. I can now hit a 410 cartride case at about 10 yards or so after a few goes. Things are getting better slowly with a few shots every night

I stick with 23/18. with a 17 active terry. depending on ammo I only use 9.5mm steel. my wrists are fxxked with arthritis awaiting now on a 4th operation. I have found precise.65 to be bang on. Nice easy draw even for me while still packing plenty of power. 

  • Like 1
Link to post
Share on other sites
1 hour ago, fred90 said:

I stick with 23/18. with a 17 active terry. depending on ammo I only use 9.5mm steel. my wrists are fxxked with arthritis awaiting now on a 4th operation. I have found precise.65 to be bang on. Nice easy draw even for me while still packing plenty of power. 

Where do you get them fred?

Link to post
Share on other sites
On 26/03/2022 at 19:49, fred90 said:

I have all my bands off a chap on ebay benbanham from Ipswich, not the cheapest but good quality and service. 

Came yesterday just got to practice now 

 

Image 1 - Precise Gen3 .65 OTT 23/18 Flat Catapult Bands x3 Slingshot Elastic +15bb

 
  • Like 2
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...