Jump to content

Camo, d the scopes and mod on the raider


Recommended Posts


22 hours ago, philpot said:

Looks well that Jimmy, is the vice in photo No1 to hold the table or chair to the ground in these winds 80

Nice to hear Ethan is back on the case, is he as tall as you yet.

Phil

And then some Phil lol

He is coming tomorrow to set up the raider for him self 

Should be a 3 shot zero as it is with any rifle he zeros lol

Then it is off to the rfd, s for Pellets 

Running out of , 22 Pellets 

I have the 177 slugs for the fx verminator but I'm taking the kral 22

As its not been out in a while 

And we are off to Middlesbrough on

the grays

Atvbjimmy ???

Link to post
1 minute ago, bigmac 97kt said:

And then some Phil lol

He is coming tomorrow to set up the raider for him self 

Should be a 3 shot zero as it is with any rifle he zeros lol

Then it is off to the rfd, s for Pellets 

Running out of , 22 Pellets 

I have the 177 slugs for the fx verminator but I'm taking the kral 22

As its not been out in a while 

And we are off to Middlesbrough on

the grays

Atvbjimmy ???

IMG_20210904_205643.jpg.a1036c71a6288216340e0d332a1b2d21.jpgIMG_20210917_193750.jpg.6d870cee0f48f96b65c455ff3725088a.jpgIMG_20211015_193555.jpg.c298e6e6aa9af5e0db7e91513eff022a.jpg

  • Like 1
Link to post
1 minute ago, philpot said:

That bugger is a tool, I was well impressed with that.  I must admit that Verminator of yours is rather nice.

Phil

It's some thing special Phil is the Vermy mate it's a tac driver 

Just can't put it down lol

Since Sean put it right for me 

But I have to leave it at home as I'll not use any other rifle I have lolIMG_20220102_214330.jpg.3b782aa3fbe799e7d9b00020950fd328.jpg

Link to post
5 minutes ago, bigmac 97kt said:

It's some thing special Phil is the Vermy mate it's a tac driver 

Just can't put it down lol

Since Sean put it right for me 

But I have to leave it at home as I'll not use any other rifle I have lolIMG_20220102_214330.jpg.3b782aa3fbe799e7d9b00020950fd328.jpg

Love that Jimmy.

Phil

  • Like 1
Link to post
6 minutes ago, philpot said:

Love that Jimmy.

Phil

Iv 5 rifles Phil 

And two on the way 

But the Vermy is my go to rifle accurate as hell 

And it shoots slugs it nice and light to walk around with 

Smooth twist barrel 

Is why it is so good with the slugs just hard to get them 

Every where says out of stock 

Lol

Only got about 200 left lol

MITCH MITCH lol

Atvbjimmy ???

  • Haha 1
Link to post
  • 2 weeks later...

Right camod the action on the raider 

Mind I'm not going to do the stock far to nice to hide it away 

Did the new pod today as well 

Not finished it yet mind 

Need some leaf camo on it now to finish it off 

It's going to be a hide gun on the squizzers for Ethan 

Now iv only gone to all this trouble 

As this was a shed find off si 

And had some kind of chemical or acid dripping on it over some years 

It was a pain doing the stock 

And I had to let it sit in the sun for over a week to bring the reaction out and wipe it off countless times lol

Now this action is another matter 

It will not take paint or blueing 

Just reacts and will not take 

Iv had enough of it so this is the way it's going to be from now on like I say this is not done yet 

Lads 

Atvbjimmy ???

IMG_20220306_144600.jpg

IMG_20220306_144554.jpg

IMG_20220306_144614.jpg

Link to post
9 minutes ago, Jonjon79 said:

Jimmy, do you remember the conversation between Nelly and Moxy after Nelly camo'd his rifle?

 

I'm sat here laughing remembering that one - thank feck that wasn't face to face :laugh:

Lost a lot of memories Jon 

After my strokes 

I'd like to blue it again but it's not taking 

And as its going to be a hide gun 

I think this is going to be the best option Jon 

Atvbjimmy ???

  • Like 1
Link to post
2 minutes ago, bigmac 97kt said:

Lost a lot of memories Jon 

After my strokes 

I'd like to blue it again but it's not taking 

And as its going to be a hide gun 

I think this is going to be the best option Jon 

Atvbjimmy ???

Ah ok mate, I'll try to find the post later :thumbs:

 

To be fair, you'll get less shine off that camo tape than a blued rifle so, it's probably a blessing in disguise mate :thumbs:

  • Like 1
Link to post
8 minutes ago, Jonjon79 said:

Ah ok mate, I'll try to find the post later :thumbs:

 

To be fair, you'll get less shine off that camo tape than a blued rifle so, it's probably a blessing in disguise mate :thumbs:

I actually like the look of it Jon 

Honest iv had loads of shit with it 

Reacting 

Spent a few weeks doing the stock 

And I prods could isolate the bad parts on the rifle if it don't react 

But iv had it now lol 

This is the best option I think 

It's still one of the most accurate rifles iv ever had honest it's mint 

I will get round to blueing it again one day but for now it will have to do just need some 3d leaf camo now and she is done 

Atvbjimmy ???

Link to post
1 minute ago, bigmac 97kt said:

I actually like the look of it Jon 

Honest iv had loads of shit with it 

Reacting 

Spent a few weeks doing the stock 

And I prods couple isolate the bad parts on the rifle if it don't react 

But iv had it now lol 

This is the best option I think 

It's still one of the most accurate rifles iv ever had honest it's mint 

I will get round to blueing it again one day but for now it will have to do just need some 3d leaf camo now and she is done 

Atvbjimmy ???

That's the important bit mate, the accuracy :thumbs:

 

What's the 3d leaf camo that you're after? Is it like a scrim material with leaf shaped bits on it?

 ........... I might have some here somewhere. 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...