Chaff 3,571 Posted January 31 Report Share Posted January 31 1 hour ago, Stavross said: Ya not wrong, this stuff worked out at about £5.50 a meter, the screw and fixings were about £400, be getting on for over 6k in materials, I done a few of them solid composite 1st one done only a dozen cuts and the blade on choppy was done. Pre drilling holes and countersink went through a couple of them aswell. Wise to it now so I put money on to cover 2 Quote Link to post Share on other sites
dogmandont 9,737 Posted January 31 Report Share Posted January 31 2 hours ago, Chaff said: I done a few of them solid composite 1st one done only a dozen cuts and the blade on choppy was done. Pre drilling holes and countersink went through a couple of them aswell. Wise to it now so I put money on to cover We fit a fair bit of the composite cladding to our buildings and just use a cheap Evolution mitre saw and multi purpose blade, the evolution saws run at a lower revolution, the blades last far longer. 4 Quote Link to post Share on other sites
Chaff 3,571 Posted January 31 Report Share Posted January 31 23 minutes ago, dogmandont said: We fit a fair bit of the composite cladding to our buildings and just use a cheap Evolution mitre saw and multi purpose blade, the evolution saws run at a lower revolution, the blades last far longer. Bet they are solid build mate must weigh a fair bit, I don't mind working with the stuff tbh it's consistently straight and cuts clean using the right kit Quote Link to post Share on other sites
mC HULL 12,109 Posted January 31 Report Share Posted January 31 6 minutes ago, Chaff said: Bet they are solid build mate must weigh a fair bit, I don't mind working with the stuff tbh it's consistently straight and cuts clean using the right kit it’s easy to work with just rob ya buying the f****r 1 Quote Link to post Share on other sites
dogmandont 9,737 Posted January 31 Report Share Posted January 31 24 minutes ago, Chaff said: Bet they are solid build mate must weigh a fair bit, I don't mind working with the stuff tbh it's consistently straight and cuts clean using the right kit I like working with it for the same reason, the cladding is fitted using an aluminium clip, dead easy. 1 Quote Link to post Share on other sites
Chaff 3,571 Posted January 31 Report Share Posted January 31 5 minutes ago, mC HULL said: it’s easy to work with just rob ya buying the f****r True its not cheap, yet I believe its recycled which makes the price even harder to swallow. 2 Quote Link to post Share on other sites
Stavross 15,165 Posted February 2 Report Share Posted February 2 Thought I’d put my van in for a service and front pads and discs, they wanted £360, sod that, done it myself in an hour and a half for £105, that says to me that they think they are worth about £150 an hour, I might go back to being a mechanic 5 Quote Link to post Share on other sites
waltjnr 6,552 Posted February 3 Report Share Posted February 3 Mine yesterday, out the same day luckily so didn't have to sleep in it ! Nearly all the kit I was plugged into was from the firm I work for ,so I've seen what it does now ,heart surgery and home in 12 hrs ,admit I was shttng myself ! 6 1 2 Quote Link to post Share on other sites
mackem 26,089 Posted February 3 Report Share Posted February 3 4 minutes ago, waltjnr said: Mine yesterday, out the same day luckily so didn't have to sleep in it ! Nearly all the kit I was plugged into was from the firm I work for ,so I've seen what it does now ,heart surgery and home in 12 hrs ,admit I was shttng myself ! Stent fitted? Quote Link to post Share on other sites
Daniel cain 44,952 Posted February 3 Report Share Posted February 3 Good luck Walt 1 Quote Link to post Share on other sites
waltjnr 6,552 Posted February 3 Report Share Posted February 3 43 minutes ago, mackem said: Stent fitted? Ablation, went round the back of my heart and cauterised 4 arteries, to alter the electrical signal that was giving me AF,go in from the groin 4 Quote Link to post Share on other sites
Greyman 27,976 Posted February 3 Report Share Posted February 3 Be out running the whippet in no time mate, good luck 1 Quote Link to post Share on other sites
waltjnr 6,552 Posted February 3 Report Share Posted February 3 So far so good! A third that are done need a 2nd later on ,luckily got done in Nuffield St barts,level of care unreal ! 1 Quote Link to post Share on other sites
TOMO 25,993 Posted February 5 Report Share Posted February 5 Just seen tatsblisters post about being safety inspector... View from my office today....shall I convert 1 Quote Link to post Share on other sites
gnasher16 30,024 Posted February 5 Report Share Posted February 5 On 03/02/2024 at 12:07, waltjnr said: Ablation, went round the back of my heart and cauterised 4 arteries, to alter the electrical signal that was giving me AF,go in from the groin Was you kept awake during that Waltjnr,just sedation ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.