Bottle moving on fx verminator

[bigmac 97kt 13,776]

Right lads need a little help on this 

The bottle is moving from side to side 

Not a lot mind and dose not effect the rifle 

It shoots mint and accurate as hell 

That was until I tightened the aln bolt top left of the pic 

This locked the bottle in place 

Thought I had sorted it but 

It also locks the trigger up so you can't fire it off 

So knocked it back a bit and every thing was sorted so I thought 

Could I feck get it to group power was down a lot 

Got so Fecked off I gave up 

Now this morning I took the bottle back off and put the bolt back to where it was 

In the first place hey presto all the power came back accuracy came back punching holes strait through the target bored with ease 

Problem is now the bottle moves again 

It's got me stumped 

If I can't get a solution it's going back to fx as i can't do out with it 

So is there any verminator owners that this has happend to before and what's the solution 

Thanks lads 

Atvbjimmy

[David.evans 5,323]

Should have bought a daystate Jimmy

sorry mate I’ll get my coat 

Atb pal 

[villaman 9,983]

Give Airfective a ring , they will help 

[barrywhite 282]

may be that bolt is a little bit to long ,  you may be able to put a little washer under the head of that bolt or take a little bit of the end of the bolt . 

[bigmac 97kt 13,776]

19 hours ago, barrywhite said:

may be that bolt is a little bit to long ,  you may be able to put a little washer under the head of that bolt or take a little bit of the end of the bolt . 

Barry that bolt is for the hammer spring 

The hole next to it has threads in it but no grub screw in it 

Looks like some thing has fallen out 

But the verminator mk2 diagram 

Don't show you 

Or don't tell you what is what 

I'll call some one tomorrow and see what's what 

Atvbjimmy

[barrywhite 282]

just had a look at mine . mine has the empty grub screw looking hole . but mine doesn't have the larger alen bolt . mine is a mark one verminator and it doesn't have the power adjuster under the barrel it just shots at 12 ft lbs only . Years back there was a lot of strip down information , I cannot find any thing now .

 

[bigmac 97kt 13,776]

4 hours ago, barrywhite said:

just had a look at mine . mine has the empty grub screw looking hole . but mine doesn't have the larger alen bolt . mine is a mark one verminator and it doesn't have the power adjuster under the barrel it just shots at 12 ft lbs only . Years back there was a lot of strip down information , I cannot find any thing now .

 

Got it sorted found a vid but of the gladiator same action on them 

It was the big aln bolt that tightens them up but you have to ever so slightly move it back so it releases the tension on the trigger 

So now it's rock solid the bottle that is lol

Accuracy is good now as well 

As the bottle was moving in my shoulder she is back to being pellet on pellet and slug on slug

Got to the point where I thought feck it if I feck it up I'll just put it in the bin 

And the fettle I was in I would of as well

Thanks for ur help Barry 

Your a star mate 

Atvbjimmy