Cluelite

[twelsh 348]

I have just purchased a cluelite single bulb model  but it had a 6v 20w bulb in it which is blown can i buy a 12v 1 million candle power bulb for it 

[poxon 5,768]

Don’t think the 12v bulb will fit in that mate if I remember rightly it’s a complete different fitting to the 6v shown

 

[dytkos 17,821]

You can fit a better bulb of the same type, or I think a 40w 6v bulb.

Cheers, D.

 

[twelsh 348]

How does it work mate as i have 12v battery  i thought these run off 12v as my last cluelite did 

 

[dytkos 17,821]

Bang a 12v one in then, may have to check the fuse

Cheers, D.

[poxon 5,768]

Just had a little look In my old cluelite it looks completely different are you sure that’s not just a cluelite torch an not a hunting lamp

[dytkos 17,821]

Lazer lite and Blazer light interchangeable parts.

Cheers, D.

[poxon 5,768]

5 minutes ago, dytkos said:

Lazer lite and Blazer light interchangeable parts.

Cheers, D.

Mine was a laser converted to blazerlite 

the lazer was a 50w 12v bulb with plastic reflective background but not the same fitting as shown of bulb

the blazer is a alloy reflective backing with 100w bulb 

think all the bits are interchangeable

[Luckee legs 487]

1 hour ago, poxon said:

Mine was a laser converted to blazerlite 

the lazer was a 50w 12v bulb with plastic reflective background but not the same fitting as shown of bulb

the blazer is a alloy reflective backing with 100w bulb 

think all the bits are interchangeable

Didn't know that. assuming it was your Lazer, Does that alloy reflector off the blazer work better than the Lazer ? 

[poxon 5,768]

1 hour ago, Luckee legs said:

Didn't know that. assuming it was your Lazer, Does that alloy reflector off the blazer work better than the Lazer ? 

The lazer is plastic backing with a chrome reflecting on it with the 100w bulb they have melt down the alloy backing stops melt down as the lazer was only meant to run a 50w bulb 

[The one 8,511]

50 minutes ago, poxon said:

The lazer is plastic backing with a chrome reflecting on it with the 100w bulb they have melt down the alloy backing stops melt down as the lazer was only meant to run a 50w bulb 

Aye i learned the hard way to up the bulb you have to replace the chrome reflector with a metal one to upgrade the bulb 

[poxon 5,768]

20 minutes ago, The one said:

Aye i learned the hard way to up the bulb you have to replace the chrome reflector with a metal one to upgrade the bulb 

Same as mate