FX Impact tuning house

[philpot 5,003]

I am going to look into getting a new shroud and a mod because the so called standard mod is rubbish even though I have added felt. I recall the tuning company that specialize in FX Impact fit their own mods and I would like to have a chat but cannot remember their name,  someone help please.

Phil

[bigmac 97kt 13,796]

Just get a mod off donnyfl

He makes the mods for fx 

Phil 

Atvbjimmy

[philpot 5,003]

Not sure they will even fit the Mk1 shroud Jimmy

 

[pav 481]

Air fective but beware he not called leaky Liam for nothing lol stay away from donny fl there shit unles your a yank

[philpot 5,003]

59 minutes ago, pav said:

Air fective but beware he not called leaky Liam for nothing lol stay away from donny fl there shit unles your a yank

Okay I know the Airgun 101 channel sells the Donny fl mods and they are shown in use by quite a few guys so why are they crap Alan.  I thought Air fective was THE place to go to.................now I really don't know who to talk to and improve things.

Phil

[pav 481]

Airgun 101 have jumped on the fx bandwagon iv herd a few donnys on different guns and a hw100 mod is prob better in fac a a&m marksman twice as quiete there alot of ppl had some good stuff done by Liam but also alot have had leaks when they have got there guns back off him and the prices they charge you shouldn't have problems don't no why you say the fx shroud and mod not good if you get your tune right there not that bad in fact I have been using either a sak mod or a&m on mine for a while just to get them a little quieter

Edited May 16, 2021 by pav

[bigmac 97kt 13,796]

Iv got a a&m marksman mod here 

Phil 

Deadly quiet but it's long 

You can have it mate 

Atvbjimmy

[Jonjon79 13,358]

54 minutes ago, bigmac 97kt said:

Iv got a a&m marksman mod here 

Phil 

Deadly quiet but it's long 

You can have it mate 

Atvbjimmy

Nice gesture Jimmy

 

The Marksman is a big bit of kit Phil but, I haven't found anything quieter yet

[philpot 5,003]

I will say that I would like to try it please Jimmy but here is my problem guys, my Impact is a series 1 shroud / mod and whilst the barrel is 1/2" unf thread, the mod is approx 20mm dia thread so is there a converter to reduce the shroud thread down to 1/2" unf or do I remove the shroud, fit a standard unf thread and not have the shroud.

As a test I have just removed the shroud and popped on a standard Weihrauch sub 12 mod but it still has a crack so no better than the FX shroud / mod set up I have. I do have a Wildcat Panther mod but it is a reflex mod and will not fit, pity.

Here are a few photos which I hope will show what I am trying to explain.

The thread on the shroud

 

The internal thread of the mod

 

The 1/2" unf barrel without the shroud.

 

Phil

[villaman 9,983]

What ever you do Phil for gods sake don’t get the donny shit , they are fcuking awful and that’s putting it politely. 
I have very good dealings with Airfective on tunes and shroud&silencers , never had a leak , but I here some have , sometimes it’s people mucking about with them and don’t know what they are doing 

[villaman 9,983]

Don’t forget Jimmy’s marksman is probably.22 

[philpot 5,003]

What do you Mitch and Pav on your .25 impacts mod wise.

 

[villaman 9,983]

Yours is .25 phill?

[philpot 5,003]

YES

[villaman 9,983]

Just now, philpot said:

What do you Mitch and Pav on your .25 impacts mod wise.

 

Airfective on mine and my old impact had Airfective as well