Gaoler 83 Posted March 5, 2021 Report Share Posted March 5, 2021 (edited) Eyup all, What are the best sling studs for my HW95 & HW97 please? What size drill bit will I need for the wood work? Cheers Edited March 5, 2021 by Gaoler Quote Link to post
sam r 356 Posted March 6, 2021 Report Share Posted March 6, 2021 Sure I saw a you tube vid on fitting one , the do’s and don’ts drill size will depend on size of screw Quote Link to post
si brown 8,486 Posted March 6, 2021 Report Share Posted March 6, 2021 On 05/03/2021 at 22:00, Gaoler said: Eyup all, What are the best sling studs for my HW95 & HW97 please? What size drill bit will I need for the wood work? Cheers Expand 4.5mm mark it with a pencil first so your happy its centre then pilot it with say a 2mm then the 4.5! set it at least 50mm from end of the stock Quote Link to post
Gaoler 83 Posted March 6, 2021 Author Report Share Posted March 6, 2021 On 06/03/2021 at 08:46, si brown said: 4.5mm mark it with a pencil first so your happy its centre then pilot it with say a 2mm then the 4.5! set it at least 50mm from end of the stock Expand Cheers Si, are Bisley studs okay, and then bands for the barrel on the 95, and lever on the 97? Quote Link to post
Gaoler 83 Posted March 6, 2021 Author Report Share Posted March 6, 2021 On a side note, Tony at AGRTuning is thinking about retiring, that will be a loss as a top bloke, knowledgable and cracking tuner! Those PG3 kits and tuned by him have transformed my 95 & 97... Quote Link to post
si brown 8,486 Posted March 6, 2021 Report Share Posted March 6, 2021 On 06/03/2021 at 09:13, Gaoler said: On a side note, Tony at AGRTuning is thinking about retiring, that will be a loss as a top bloke, knowledgable and cracking tuner! Those PG3 kits and tuned by him have transformed my 95 & 97... Expand yeah it'll be a shame cos hes a very helpful bloke! got a few bits on order for a mate of mine. not sure as to the OD's on the 97 and 95 not got any here at the moment but the Bisley sling studs will be fine, you'll get two in the pack.. short for the front long for the back.. make sure its dead centre though cos they look terrible if not done right! this is the place I get barrel bands from Large Range of Gun Sling Fittings - Bisley Quake Uncle Mikes Swivels WWW.ANT-SUPPLIES.UK Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.