This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
Now Complete.
Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">

Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
[url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
[url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr

This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
 
P1100805 by Terry Griffiths, on Flickr">

P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
P1100807 by Terry Griffiths, on Flickr">

kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

Here is the UK legal carry Opinel mod slip-joint i have been working on.

I dropped the point on the original no8 blade and shortened it to 3"
 
The slightly unusual shape was determined by the central pivot point and steps in the original blade. You can see this from the pre-assembly pic. Although it looks slightly unusual it has the advantage of giving a shoulder to place your thumb on which actually holds the slipjoint spring in making it even more solid and less likely to fold up on your fingers than a normal slipjoint design.
 
Milled brass liners with soldered bolsters and stabilized stag scales, all fixed together with stainless pins with the exception of the brass rivets on the scales.
P1100490 by Terry Griffiths, on Flickr">P1100491 by Terry Griffiths, on Flickr">P1100492 by Terry Griffiths, on Flickr">P1100494 by Terry Griffiths, on Flickr">p1100495 by Terry Griffiths, on Flickr">P1100496 by Terry Griffiths, on Flickr">P1100499 by Terry Griffiths, on Flickr">P1100503 by Terry Griffiths, on Flickr">P1100509 by Terry Griffiths, on Flickr">P1100513 by Terry Griffiths, on Flickr">P1100489 by Terry Griffiths, on Flickr">P1100488 by Terry Griffiths, on Flickr">