Scuffs and light scratches

[Phill-W68 547]

3 hours ago, philpot said:

I would have a go with the method I list abpve that Jimmy passed on, it can only help and may be enough for the farmer, you would get brownie points as you sorted it for free.

Phil

Spoke to the owner, so it's a birchwood casey perma blue kit on it's way to mine...

[philpot 4,998]

On 29/05/2020 at 19:38, Phill-W68 said:

Spoke to the owner, so it's a birchwood casey perma blue kit on it's way to mine...

Don't expect too much Phill as the one I used a few years ago was bloody useless, I hope this one is better.

Phil

[bigmac 97kt 13,792]

On 31/05/2020 at 21:07, philpot said:

Don't expect too much Phill as the one I used a few years ago was bloody useless, I hope this one is better.

Phil

Sorry phil for not replying have a lot on my plate at the moment

best bluing iv ever used mate

if you can find it

[Phill-W68 547]

2 hours ago, bigmac 97kt said:

Sorry phil for not replying have a lot on my plate at the moment

best bluing iv ever used mate

if you can find it

No worries mate, I've just got that birchwood casey one through the post yesterday.

[Phill-W68 547]

Did you strip the gun right down

[bigmac 97kt 13,792]

16 hours ago, Phill-W68 said:

Did you strip the gun right down

Had to with this one phil

 

[Phill-W68 547]

6 minutes ago, bigmac 97kt said:

Had to with this one phil

 

Looks superb pal

[bigmac 97kt 13,792]

Rub it over with tin foil crumpled up into a ball

If you are going to strip the hole thing phil

Or if you have a bench grinder with wire wheel atachment

use that BUT only if you are going to strip the hole thing

 

[bigmac 97kt 13,792]

bench grinder wire wheel results

[bigmac 97kt 13,792]

The one above i did not blue

polished the hell out of it and left it

[Phill-W68 547]

I was hoping to leave the AAs410 fully assembled and just reblue that way as I'm not confident of stripping it fully down...

[bigmac 97kt 13,792]

On 06/06/2020 at 08:21, Phill-W68 said:

I was hoping to leave the AAs410 fully assembled and just reblue that way as I'm not confident of stripping it fully down...

Use the tin foil if your going to do it like phil

it works a treat mate

[Phill-W68 547]

30 minutes ago, bigmac 97kt said:

Use the tin foil if your going to do it like phil

it works a treat mate

Will let you know how I get on..cheers pal

[bigmac 97kt 13,792]

On 07/06/2020 at 16:42, Phill-W68 said:

Will let you know how I get on..cheers pal

Have you stripped the blueing off phil

Phil once you have taken the bluing off put some gloves on as the oil in your hands will affect the new bluing when you put it on .

atvbjimmy

[Phill-W68 547]

15 minutes ago, bigmac 97kt said:

Have you stripped the blueing off phil

Phil once you have taken the bluing off put some gloves on as the oil in your hands will affect the new bluing when you put it on .

atvbjimmy

No not yet mate, but I will do,thx for that