Last cut

[lllluke1 329]

Mowed for silage for the last cut yesterday and the farmer asked me to have a wander to see if I could drop any foxes that were about.

Had them both at about 100 yards

 

[Sausagedog 7,381]

What you wholloped them with?

I was out too, got busted....twice!

[lllluke1 329]

3 hours ago, Sausagedog said:

What you wholloped them with?

I was out too, got busted....twice!

.223

[shovel leaner 7,650]

Still waiting on the silage to be cut , might not be the last one though , have to see what the weather does. Can’t beat silage , foxes can’t resist putting in an appearance. Well done , they look in nice condition.

[Stavross 15,388]

Nice, they look in cracking nic,

[lllluke1 329]

Went out for a quick shine earlier.  Called in this vixen and had to shout at her to get her to stop.  Dropped her at no more than 40 yards.

Saw another 2, but 1 of them I couldn't get a safe shot, the other one took off as soon as the lamp hit it.

 

 

[David.evans 5,323]

Great shooting Luke 

what call bought the vixen in ?

atb 

[lllluke1 329]

Don't know what it is called.  The stainless flying saucer shape one, with a hole straight through it.  Picked it up in my local RFD in a bag with no name on it

[shovel leaner 7,650]

I think they are called the Acme 504 , I used to use a brass one , I think it was called a WAM . The only calls I use now are my Icotec and my hand/mouth  . The way I drive around spotting it’s very often just to stop them and turn them . The Icotec is good to set up and sit back and wait . 

[shovel leaner 7,650]

I think they are called the Acme 504 , I used to use a brass one , I think it was called a WAM . The only calls I use now are my Icotec and my hand/mouth  . The way I drive around spotting it’s very often just to stop them and turn them . The Icotec is good to set up and sit back and wait . 

[Deker 3,478]

As others have said, the 2  look in good condition, also young, particularly the first!  

[lllluke1 329]

5 hours ago, shovel leaner said:

I think they are called the Acme 504 , I used to use a brass one , I think it was called a WAM . The only calls I use now are my Icotec and my hand/mouth  . The way I drive around spotting it’s very often just to stop them and turn them . The Icotec is good to set up and sit back and wait . 

What Icotec you got?  Thinking of getting one

[David.evans 5,323]

Luke 

l have the 500 loads of fox calls on it and use the Wam quite often 

atb 

[sussex 5,777]

On 07/09/2019 at 20:19, Stavross said:

Nice, they look in cracking nic,

Apart from there dead .....! !   

 

 

 

I’ll get me coat ..........

[shovel leaner 7,650]

On 08/09/2019 at 12:51, lllluke1 said:

What Icotec you got?  Thinking of getting one

I’ve got the gc 350 model , you can download different calls onto an SD card , one call I would recommend is the pheasant distress . The beauty of these type of callers is you can set them well away from your shooting position and if you think about wind / breeze you will be undetected by foxes . You  can activate and control volume or change the call remotely. I’ve also got the “quiver critter “ type attachment. I’ve used this and had success with it , but I wonder weather they would have appeared anyway without it . I think these are a fantastic bit of kit for lying in wait for foxes , icotec are not the only make there are others out there , but I think they are reasonably priced.