Switches

[twelsh 348]

Anyone know how to replace lightforce switch any info much appreciated I’ve had lamp for yrs replaced wire now switch is stuck on and a nightmare to turn off tried all sorts nowt sorted it so new switch on menu

[Netmaker 909]

 not trying you how to suck eggs but undo the soldering on the switch that is knackered and re solder the new into place if you don't have one you might get one off the bay

[twelsh 348]

I want to know how to get to the switch mate

[twelsh 348]

3 minutes ago, Netmaker said:

 not trying you how to suck eggs but undo the soldering on the switch that is knackered and re solder the new into place if you don't have one you might get one off the bay

I’m trying to find out how to get to switch mate is it through bottom we’re wire goes through or do I have to take head off and drill pot rivers out of metal bit where bulb slots into

[Netmaker 909]

try drilling the rivits on mine you can take the handle a part to get to the switch hope this helps

[trigger2 3,146]

Pull the rubber cover off the switch mate. Theres a little like nut underneath undo that then the switch will push back into the handle. Take the little orange bit out of the bottom of the lamp handle and there should be enough wire to pull the switch out of the lamp.

[twelsh 348]

17 hours ago, trigger2 said:

Pull the rubber cover off the switch mate. Theres a little like nut underneath undo that then the switch will push back into the handle. Take the little orange bit out of the bottom of the lamp handle and there should be enough wire to pull the switch out of the lamp.

Done the switch mate just did what you said 10 mins sorted for season now lol