Furrosious ferreter 499 Posted July 19, 2019 Report Share Posted July 19, 2019 I decided to make a range board as i had half n hour spare... Ive got 3 airguns to set up 1) hw77 .22 1990 with ritcher 3-12×50 2) hw97 .22 2001 with hawke 4-16×50 3) theoben fenman .20 2007 with hawke10x42 All are zero'd at 30 meters. Is this an adaquate range to be zero'd at for all rifles? FF Quote Link to post
villaman 9,983 Posted July 19, 2019 Report Share Posted July 19, 2019 Nicely done I zero my .22’s in at 30 yards using 13.4gr pellet 1 Quote Link to post
Furrosious ferreter 499 Posted July 19, 2019 Author Report Share Posted July 19, 2019 Just reallised that at anything but zero im possibly going to be hitting the other aim points... Oh well will see how it goes and put a pic up... I expect it to look like someones shot it with a shotgun. FF Quote Link to post
mark williams 7,551 Posted July 20, 2019 Report Share Posted July 20, 2019 I use a piece of wallpaper on some 1/4 ply at 28 yards zero for .22 and 38 yard zero for .177. " On a perfectly still day " ( ish) Good old fashioned ground workers tape or modern range finder for precise ranges. ( I`m not a chair gun fan ) , although the method is excellent, I love old school. Get your first zero, leave your preferred magnification settings alone and work back at 5 yard increments making note of your mill dot to point of impact results through your scope. Works for me and gets me some extremely accurate results ( most times) Good luck, Mark. 5 Quote Link to post
villaman 9,983 Posted July 20, 2019 Report Share Posted July 20, 2019 Chairgun is ok but make sure all the info is correct. I have used chairgun to set up my impact and its on the nail from 30 yards out to 138 yards Quote Link to post
Phill-W68 547 Posted July 20, 2019 Report Share Posted July 20, 2019 9 hours ago, villaman said: Chairgun is ok but make sure all the info is correct. I have used chairgun to set up my impact and its on the nail from 30 yards out to 138 yards How is the fac impact going VM?, just out of curiosity have you thought about giving the new slug liner barrel a try out... Quote Link to post
villaman 9,983 Posted July 20, 2019 Report Share Posted July 20, 2019 5 hours ago, Phill-W68 said: How is the fac impact going VM?, just out of curiosity have you thought about giving the new slug liner barrel a try out... Yes I have but can’t get hold of one at the moment but a British company have started making slugs which works in the stx liner , which is the standard one in the x barrel impacts and crowns I have ordered a tin but at 30p a shot they will not be a plinking pellet Quote Link to post
Deker 3,478 Posted July 28, 2019 Report Share Posted July 28, 2019 (edited) On 19/07/2019 at 22:09, Furrosious ferreter said: Just reallised that at anything but zero im possibly going to be hitting the other aim points... Oh well will see how it goes and put a pic up... I expect it to look like someones shot it with a shotgun. FF You will, but you should still be able to work things out. It would have been better to use a long board vertically, and extend the gap at each distance, but I don't really see an issue as long as you check/mark each gun before moving to the next! A pic after you have checked them all will be good! Edited July 28, 2019 by Deker Quote Link to post
Furrosious ferreter 499 Posted July 28, 2019 Author Report Share Posted July 28, 2019 Yeah i did all that and started a new thread... Range board part 2 I managed to get all my hold over points on all guns. Just need a good day to go out and check them. FF Quote Link to post
Phill-W68 547 Posted July 28, 2019 Report Share Posted July 28, 2019 On 21/07/2019 at 00:17, villaman said: Yes I have but can’t get hold of one at the moment but a British company have started making slugs which works in the stx liner , which is the standard one in the x barrel impacts and crowns I have ordered a tin but at 30p a shot they will not be a plinking pellet They are expensive at the moment from what I've seen, just thatbive seen that matt dubber and a couple of others from.over there is SA seem to swear by them... Quote Link to post
villaman 9,983 Posted July 28, 2019 Report Share Posted July 28, 2019 27 minutes ago, Phill-W68 said: They are expensive at the moment from what I've seen, just thatbive seen that matt dubber and a couple of others from.over there is SA seem to swear by them... Don’t believe the hype , these guns have been extremely modified to shoot slugs normal FX guns will not shoot them that great , believe me i have tried you just need to look at the Airgun nation forum to see what’s , what Quote Link to post
Phill-W68 547 Posted July 28, 2019 Report Share Posted July 28, 2019 7 minutes ago, villaman said: Don’t believe the hype , these guns have been extremely modified to shoot slugs normal FX guns will not shoot them that great , believe me i have tried you just need to look at the Airgun nation forum to see what’s , what So it's not just changing the pellet liner for a slug liner then? Quote Link to post
villaman 9,983 Posted July 28, 2019 Report Share Posted July 28, 2019 1 hour ago, Phill-W68 said: So it's not just changing the pellet liner for a slug liner then? No it does help but you need all the mods as well 1 Quote Link to post
Phill-W68 547 Posted July 28, 2019 Report Share Posted July 28, 2019 58 minutes ago, villaman said: No it does help but you need all the mods as well I'd stick with pellets then haha, not that I've got an impact like but...curious... Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.