Hunting Rhys 0 Posted March 26, 2019 Report Share Posted March 26, 2019 The bsa ultra says to fill to 232 is this safe to do so ? Quote Link to post
Deker 3,478 Posted March 27, 2019 Report Share Posted March 27, 2019 I had one many years ago but don't recall fill pressure. Where does it say fill to 232? If its the Owners manual then I would guess its pretty safe or they will have a lot of Law suits against them and go broke...again! Quote Link to post
villaman 9,983 Posted March 27, 2019 Report Share Posted March 27, 2019 Yes you are fine but you might find 200 might give you less power curve Quote Link to post
philpot 5,005 Posted March 27, 2019 Report Share Posted March 27, 2019 4 hours ago, villaman said: Yes you are fine but you might find 200 might give you less power curve Ditto, although I used to go for 210bar with little difference but no higher. Phil Quote Link to post
charlie caller 3,654 Posted April 4, 2019 Report Share Posted April 4, 2019 I fill mine to 190, this gives a very good power curve right down to around 90-100 bar, cracking rifles the ultras. Quote Link to post
j j m 6,540 Posted April 6, 2019 Report Share Posted April 6, 2019 I always filled mine to 190 worked a treat Quote Link to post
xraiderx 94 Posted April 10, 2019 Report Share Posted April 10, 2019 I used to fill mine to 230 but that was tench redged Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.