Deker 3,478 Posted March 19, 2019 Report Share Posted March 19, 2019 Can someone please tell me what the SILVER fittings are called on the attached picture, and if possible where I can buy them! I have found Offset versions but want them straight as shown, they obviously exist but I can't track them down. This is part of a shower wall fitting. MANY THANKS Quote Link to post Share on other sites
Greyman 29,799 Posted March 19, 2019 Report Share Posted March 19, 2019 Think they are the same thread as a standard tap mate, just get the plastic securing nut from a tap and see if it will screw on, if it does then any standard tap fixing should do,probably bath tap not sink one of these flexi,S will have both threads depending on what your trying to achieve Quote Link to post Share on other sites
Deker 3,478 Posted March 19, 2019 Author Report Share Posted March 19, 2019 Cheers, I'm trying to make my own shower wall fitting, all I need is the SILVER parts in the picture I posted, don't know what they are called or where I can get them! Quote Link to post Share on other sites
cragman 2,809 Posted March 19, 2019 Report Share Posted March 19, 2019 Obvious ask but have you tried the plumb centre? Show them what you’re after, you never know Quote Link to post Share on other sites
gnipper 6,599 Posted March 19, 2019 Report Share Posted March 19, 2019 Is it not just a back plate for a bar/mixer shower? Quote Link to post Share on other sites
Deker 3,478 Posted March 19, 2019 Author Report Share Posted March 19, 2019 6 minutes ago, cragman said: Obvious ask but have tried the plumb centre? Show them what you’re after, you never know Grahams, Screfix, Toolstation, City Plumbing, etc etc! Quote Link to post Share on other sites
Greyman 29,799 Posted March 19, 2019 Report Share Posted March 19, 2019 8 minutes ago, Deker said: Cheers, I'm trying to make my own shower wall fitting, all I need is the SILVER parts in the picture I posted, don't know what they are called or where I can get them! Screw fix website would be a good place for a quick search, and though it may sound obvious can you not just take the two off the back plate you already have looks like a radiator key fits in the inside to undo it, then just screw them into a flexi tap connector and your away Quote Link to post Share on other sites
Deker 3,478 Posted March 19, 2019 Author Report Share Posted March 19, 2019 1 minute ago, gnipper said: Is it not just a back plate for a bar/mixer shower? all I need is the SILVER parts in the picture I posted, don't know what they are called or where I can get them! Quote Link to post Share on other sites
Deker 3,478 Posted March 19, 2019 Author Report Share Posted March 19, 2019 2 minutes ago, Greyman said: Screw fix website would be a good place for a quick search, and though it may sound obvious can you not just take the two off the back plate you already have looks like a radiator key fits in the inside to undo it, then just screw them into a flexi tap connector and your away I'm trying to make my own shower wall fitting, all I need is the SILVER parts in the picture I posted, don't know what they are called or where I can get them! I don't have anything to take off anything! Quote Link to post Share on other sites
Jackknife 824 Posted March 19, 2019 Report Share Posted March 19, 2019 (edited) 1 hour ago, Deker said: Cheers, I'm trying to make my own shower wall fitting, all I need is the SILVER parts in the picture I posted, don't know what they are called or where I can get them! I believe its called a coupler, you can by them at plum center or e Bay do a kit Edited March 19, 2019 by Jackknife 1 Quote Link to post Share on other sites
waltjnr 7,345 Posted March 19, 2019 Report Share Posted March 19, 2019 Just go into a proper plumbers merchants and they will help, anything DIY based aren't staffed by knowledgeable people, a merchants will be your best bet! Quote Link to post Share on other sites
wilbur foxhound 480 Posted March 19, 2019 Report Share Posted March 19, 2019 Try shower fittings Quote Link to post Share on other sites
Chid 6,645 Posted March 19, 2019 Report Share Posted March 19, 2019 Backplate straight connector Quote Link to post Share on other sites
FLATTOP 4,639 Posted March 19, 2019 Report Share Posted March 19, 2019 (edited) https://plumbuniverse.co.uk/product/compression-tap-connector-chrome-plated-straight-or-elbow-15x12-and-22x34/ Edited March 19, 2019 by FLATTOP Quote Link to post Share on other sites
Deker 3,478 Posted March 19, 2019 Author Report Share Posted March 19, 2019 Thanks for your help. I think I have a link to the right thing now! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.