Kay 3,709 Posted January 15, 2019 Report Share Posted January 15, 2019 In the last few months I hAve been tatting with epoxy resin . I get cable reel tops from work and fill the holes and put resin on them this is an on going project and takes roughly 3 to 4 weeks to complete . This latest one is 11 1/2 diameter x 3/4 inch deep. I have filled small holes with wood filler and wedged a milk bottle lid in the centre hole which I will fill with resin tomorrow then when it's dry I will cover it in wood filler. Sand it really fill where it needs it before priming it then do my resin work The bottom pic is an 18 inch round I have made for my parents 54th wedding anniversary . It's fast becoming a passion. Thanks for looking 8 1 Quote Link to post Share on other sites
Chaff 3,590 Posted January 15, 2019 Report Share Posted January 15, 2019 Very nice Kay, like that I have a mate who does all sorts of weird and wonderful stuff with epoxy resin including a coffee table covered in Penny's which looked amazing so we are now without a coffee table in the house as I'm prepping it to try and do the same 1 Quote Link to post Share on other sites
Kay 3,709 Posted January 15, 2019 Author Report Share Posted January 15, 2019 7 minutes ago, Chaff said: Very nice Kay, like that I have a mate who does all sorts of weird and wonderful stuff with epoxy resin including a coffee table covered in Penny's which looked amazing so we are now without a coffee table in the house as I'm prepping it to try and do the same I am hoping to resin 2 of the big cable reel tops together as there not very thick and put hair pin legs on it . Have you seen the beer bottle top tables as well they look brilliant . This resin stuff is so versatile ain't it. Will you stick a pic of your table on when you have done it 1 1 Quote Link to post Share on other sites
Gooner 143 Posted January 15, 2019 Report Share Posted January 15, 2019 3 hours ago, Kay said: In the last few months I hAve been tatting with epoxy resin . I get cable reel tops from work and fill the holes and put resin on them this is an on going project and takes roughly 3 to 4 weeks to complete . This latest one is 11 1/2 diameter x 3/4 inch deep. I have filled small holes with wood filler and wedged a milk bottle lid in the centre hole which I will fill with resin tomorrow then when it's dry I will cover it in wood filler. Sand it really fill where it needs it before priming it then do my resin work The bottom pic is an 18 inch round I have made for my parents 54th wedding anniversary . It's fast becoming a passion. Thanks for looking Hi Kay how have you obtained the finished (marbling) effect you have? Quote Link to post Share on other sites
Gooner 143 Posted January 15, 2019 Report Share Posted January 15, 2019 Looks great by the way 1 Quote Link to post Share on other sites
Kay 3,709 Posted January 15, 2019 Author Report Share Posted January 15, 2019 28 minutes ago, Gooner said: Hi Kay how have you obtained the finished (marbling) effect you have? I use a heat gun on the low setting and then switch to a hairdryer to move the resin I also use a drinking straw to move small areas 1 Quote Link to post Share on other sites
Chaff 3,590 Posted January 15, 2019 Report Share Posted January 15, 2019 Here some a mate does 2 Quote Link to post Share on other sites
Gooner 143 Posted January 15, 2019 Report Share Posted January 15, 2019 37 minutes ago, Kay said: I use a heat gun on the low setting and then switch to a hairdryer to move the resin I also use a drinking straw to move small areas Thanks Kay Quote Link to post Share on other sites
Kay 3,709 Posted January 15, 2019 Author Report Share Posted January 15, 2019 4 hours ago, Chaff said: Here some a mate does Are they on ceramic ? I Love the middle one Quote Link to post Share on other sites
Chaff 3,590 Posted January 15, 2019 Report Share Posted January 15, 2019 Not ceramic Kay just MDF painted white to seal then mixes resin with colour an adds a couple of drops of silicone to get the colours to separate give it a go Quote Link to post Share on other sites
pesky1972 5,217 Posted January 16, 2019 Report Share Posted January 16, 2019 Nice stuff. I’ve always fancied having a go at making something with resin. Maybe a bit gimmicky but the turned bowls using coloured pencils look smart. I like this guy’s guitar too. 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.