pav 481 Posted October 13, 2018 Report Share Posted October 13, 2018 (edited) Ant supplies do a 30 mm weaver rail tube clamp just put it on the photon tube and use the side weaver for torch Edited October 13, 2018 by pav 1 Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 1 hour ago, philpot said: There is a fully adjustable mount like the one Si has shown and I believe there is another that can be bought on ebay which will allow you to set exactly to the aim point. In fact I am thinking of doing the same as I have weaver rails on the FX Impact that are not in use so I can set my Nitesite finder to the gun rather than the Viper or Wolf units I have but in my case I may need to transfer to another gun at some stage although I really don't think it would be required. Phil Worth a look, any idea what that mount is called? Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 50 minutes ago, pav said: Don't really want it on top of the photon pav, as the on/off and scrolling buttons are on top of the photon... I'm a clumsy sod haha but Ty... Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 Just found this, phoned them to see if they sold the rail/bracket separate but their closed grrrrr. Only need the bracket... Quote Link to post
philpot 5,039 Posted October 13, 2018 Report Share Posted October 13, 2018 Let me know how you get on Phill, as I may get one of those. Phil Quote Link to post
philpot 5,039 Posted October 13, 2018 Report Share Posted October 13, 2018 Optic Warehouse certainly have a large product range but I am buggered if I can find the above item either complete or as a mount on it's own. Can you post a link please Phill. Phil Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 (edited) 59 minutes ago, philpot said: Can't send a link, dont know how too haha Edited October 13, 2018 by Phill-W68 Quote Link to post
philpot 5,039 Posted October 13, 2018 Report Share Posted October 13, 2018 Go to the page Phill, then swipe the curser on the http bar at the top of the page to highlight it, right click the highlighted name bar and 'copy'. Now go to your topic thread and start a new post, right click in the post box 'paste', left click and the link is then posted. A condensed instruction, hope it makes sense. Good luck. Failing that Phill, just look at the advert on their site and you will see an SKU number, just give me that and that will direct me to the item. Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 10 minutes ago, philpot said: Go to the page Phill, then swipe the curser on the http bar at the top of the page to highlight it, right click the highlighted name bar and 'copy'. Now go to your topic thread and start a new post, right click in the post box 'paste', left click and the link is then posted. A condensed instruction, hope it makes sense. Good luck. Failing that Phill, just look at the advert on their site and you will see an SKU number, just give me that and that will direct me to the item. I've done it the hard way haha Go on optic warehouse, click on nightvision/thermal... Click on filter, click on brand, scroll down click on nitesite, scroll to 2nd page its there... OMG , hate phones and computers Quote Link to post
Phill-W68 547 Posted October 13, 2018 Author Report Share Posted October 13, 2018 (edited) 17 minutes ago, philpot said: Go to the page Phill, then swipe the curser on the http bar at the top of the page to highlight it, right click the highlighted name bar and 'copy'. Now go to your topic thread and start a new post, right click in the post box 'paste', left click and the link is then posted. A condensed instruction, hope it makes sense. Good luck. Failing that Phill, just look at the advert on their site and you will see an SKU number, just give me that and that will direct me to the item. Click on the picture and it brings up 3pics one of the L-shaped bracket, I was using my phone haha Edited October 13, 2018 by Phill-W68 Quote Link to post
si brown 8,486 Posted October 13, 2018 Report Share Posted October 13, 2018 13 minutes ago, Phill-W68 said: Click on the picture and it brings up 3pics one of the L-shaped bracket, I was using my phone haha https://www.opticswarehouse.co.uk/product/nite-site-mountable-laser-rangefinder/ that'll save a load of fannying about Phil 1 Quote Link to post
philpot 5,039 Posted October 13, 2018 Report Share Posted October 13, 2018 Cheers Si, Phill we need to train you up on computer skills but not by me because most of the time, I am crap but our Si to the rescue, sorted. Having a second viewing angle, that unit looks spot on and I am deffo up for one of those. I wonder what, if any, adjustment the bracket has because I think you will need some to get it just perfect. Phil Quote Link to post
villaman 9,982 Posted October 13, 2018 Report Share Posted October 13, 2018 F*** off the niteshit one and buy CRS cheaper and lighter I cant not stand the over priced niteshit stuff This is my opinion of niteshit and many others agree with me before any body starts on me 2 Quote Link to post
philpot 5,039 Posted October 13, 2018 Report Share Posted October 13, 2018 Shut up you old tart Mitch. I know you use a Nitesite for much of your shooting but just don't tell anyone We have already got these so making good use of them and they are every bit as good as the CRS just more expensive but there again I bought mine at almost the same price as the CRS ............................................... SO THERE What a relief the Pulsar kit is sooooooooo well priced............he he Phil 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.